installing slimcubby's HID kits???

i just got my HID heads & fogs from slimcubbys group buy and wanted some info on installing them....each set had some blade connectors from them thats a black wire & a red wire, the fogs connectors like that are smaller & longer, but where do both these connectors go on each kit?

 

if im correct red goes to the battery and black is grounded somewhere. send slim a pm and he will help you out!

 

they dont look like big enough ends to connect to the battery...on one set they might be 1/4 in. wide and the other set there maybe 1/16th wide...

 

http://www.tacomaworld.com/forum/gr...p-buy-round-5-ends-4-5-09-a-2.html#post487856

http://www.tacomaworld.com/forum/lighting/32648-there-hid-install-diy-tacoma.html

thats the best i could find for you bud.

 

install was pretty simple, except for some reason on the driverside headlight plug the spade connectors that you stick into the oem plug would stay in good, so u just cut the wire from the ballast and from the OEM plug and just wired them together...works great now! fogs were straight forward, hardest part was the little room to work with and finding a place to mount the ballast! so in conclusion it was a easy install except for have to cut &wire into the oem wiring on the driver side, but that just took maye 5min extra....ill try an get pics sometime this week though!