Wiring LED's to turn on with dome light.

Anyone can help me wire some LED's to turn on when the dome light turns on when the doors open? There must be a wire i can tap into correct?

Thanks!

 

i used this for my guide...pretty much running the same thing but white instead

http://www.xr-underground.com/forum/showthread.php?t=16272

 

thanks. In his diagram... what/where is the IGN 12v? do you know the color and location? Also what is a "jumper"? do i just connect the 87, 30 and 85?

 

k thats the part that i did a little differently. i didn't use a jumper and my relay is a bit different. i gotta go look again lol.

the IGN 12V is so you can turn it on on command using a switch. this is the part i did differently. its basically just another route for your power to get to your lights, overriding the relay.

 

ok, can you let me know when you recall?

also where is the IGN 12v wire?

 

can some one tell me how to connect led to dome light? i want when i unlock or open door the led turn on same time as dome light.I open the dome light yesterday it have 3 wire in there i am not sure which one to connect to.

thanks

 

i connected my led lights to my door trigger so they will turn on once the door opens but its not giving off enough power the lights are very dim how come?

 

i've changed it up since then.

the door triggers are negative charge, so i used a three way switch to switch the grounds instead of using a relay.

i have a writeup buried somewhere in my build thread.