Long Travel BS Thread

I'll take 2 please

 

Landon do a group buy for us
I know your a good fabber

 

yeah Link my truck buddy.

 

Thats an example of the defined kit above.

Or you can do it the other way and do a shackle flip (which is better I think)

 

when you weld the spring hanger and shackle hanger...how do you know exactly where to weld it? is the front on just mounted same spot as stock? the the other one at 50. whatever inches eye to eye? lol

 

mock everything up and do a lot of measuring before you burn it on there permanately. Cycle the springs at full droop full bump ect. take note of the shackles position at bump and droop, if you have a traditional shackle you ideally want that thing to be at 90* at full drop and at bump you want to make sure it doesnt come into contact w/the frame. kind of the basics right there i guess. That magic number of 52.5" eye to eye is for older yotas not ours.

 

Yes you have the option to use your front stock mount if you want.
For the rear, I break it down to the main leaf and cycle it. Then choose the best spot according to the geometry and size shackles you choose. Depending on what company kit you choose, they usually will tell you the spot to mount it. But I just go off of my own cycling and use what they say as a ball park figure

 

x2...the troof right there

 

are they just not stiff enough??

 

I can make another set

 

do you miss bottoming out on small wash sections at 25 mph? or is the offroad shrinkage too much?


in the words of ricky bobby.... "i just wanna go fast momma!"

 

Lolz
http://ventura.craigslist.org/cto/3194561291.html

 

Man that truck looks like it was rode hard and put up wet

 

It would be awhile before I could but I will keep this in mind

 

Again....is he trying to get a raptor ?

 

negative ghost rider

 

This guy needs a smaller picture

https://www.race-dezert.com/classifieds/index.php?ct=wheeltire&md=details&id=28857

 

A big 4 door baby stroller?