seat belt buzzer driven me insane

how is every body

 

I'm super , thanks for asking .

 

Its easy to turn off... Welcome to TW!!!

1) Turn the Car 'ON', but do not start the engine (Leave your foot off the brake). Cycle your trip reset knob until it reads ODO. Turn the ignition back off. Wait a couple of seconds.
2) Make sure seat belt is not fastened
3) Turn the ignition back on, do not start the car (Leave you foot off the break) As soon as you see everything light up, press and hold the trip reset knob and do a long 12 second count.
4) Keep your finger on the trip reset knob. Fasten your seat belt, as soon as you fasten your seat belt, you should see the ODO display go from XXXX miles to "b-on". At that time take your finger off the trip reset knob and press it again. It should cycle to "b-off". You should be all set and turn the ignition off and unfasten your seat belt.

 

Welcome to TW!

 

Thanks for the info........but......

ODO cycling method apparently does not work on the new 2011
Tried several times. Never got the xxxx on odo.

Can click the brake on to shut DRL, butthen, the brake light and never ending chime is the penalty.

Taking a hammer to turn signals would be shooting own foot.

Ah, well....love my truck!