This is the Hi-Clearaance rear that is designed to work with a swingout. Bumpers without swingouts will be modified to be closer to the corners of the truck as the extra space for the spindles is not needed. I will post that configuration as soon as it is complete. The standard replacement rears that do not require bedside sutting will be available very soon.
These are fully formed and welded plate. The main mounts to the frame are one piece through the bumper for ultimate strength. The main mounts are 3/8" Steel, all of the other plate components are 3/16" thick. The hidden hitch option behind the license plate is additionally supported with 2" square tubing that is 3/16" wall. The factory license plate lights are reused. Light cutouts for Rigid Flush-mounts are also optional.
Swing outs hinges are massive 1.75" spindles with ball bearings and zerk fittings. The latch is a Synergy Suspension rotary lock that is completely fail safe. The gate is made from 1.75" x .120 Wall Tubing. The swing out automatically locks open when its fully extended using a spring lock pin. The pin rides on a stainless track to prevent corrosion and galling into steel.
Swing out pictured is pretty standard, additional options are available at customers request.
Base bumper 875.00
Optional Hidden Hitch 150.00 (not rated but bombproof)
Optional Reverse Light cutouts 50.00
Swing out, basic starts at 450.00, includes tire carrier. Adding Nato Can holders, Rotopax mounts, etc are additional.
Powdercoat is 150.00 for base 75.00 for swing out