urd supercharger

branct06 · 06-23-2008, 08:48 PM

will the urd supercharger limit my motor life, will it burn out my motor? is anyone running the urd supercharger set up, how do you like it?

BrunesDoesTRD · 06-24-2008, 04:21 PM

Superchargers will wear on the engine- Build it right and it'll be fine for lots of miles.
Pay close attention to it and you'll be fine. Also know that as the supercharger comes stock it's prolly got a 8 or less PSI pulley- You'll be able to get other pulleys, but as soon as you do that- you've moved beyond the stocker motors capability to cope with the pressure and you'll have to get into really advanced engine and fuel managment.

Good luck- and let me know how it goes!!

hail-bop Command · 06-24-2008, 04:46 PM

I had a dream I had one and it was fun while it lasted....

Spyder327 · 06-30-2008, 01:25 AM

There's quite a few people on other forums that have the kit. The pulley it comes with is around 6psi depending on location.

wes · 07-17-2008, 07:53 AM

Adding a supercharger would definitely be fun however the increase in EGT(exhaust gas temp)has been found(by URD) to burn out and clog(causing malfunction)the primary CAT converters after about 50,000 miles.If you plan on your truck being a"lifer" for you i might would rethink the idea-which is exactly what i have done-hope this helps.

06-23-2008, 08:48 PM	#1
branct06 Member Joined: Jun 2008, #7489 Location: norcross Ga. and High Point Nc. Age: 19 Posts: 98 05 4x4 black sr5 long bed trd sport 2005 Double Cab Automatic 4.0 v6 super 40 flowmaster turned down before rear axle, k&n intake, ipod interface, 20% 3m tint all the way around	urd supercharger will the urd supercharger limit my motor life, will it burn out my motor? is anyone running the urd supercharger set up, how do you like it?

06-24-2008, 04:21 PM	#2
BrunesDoesTRD Just Hanging Out. Joined: May 2008, #7011 Location: Panhandle Florida Age: 24 Posts: 514 08 Red with Graphite Inside 2008 Access Cab Manual 4L V6 Debadge, Tint, LiteRider Tonneau with Locker Handle, 5 Pc Billet Grill-Murdered Out	Superchargers will wear on the engine- Build it right and it'll be fine for lots of miles. Pay close attention to it and you'll be fine. Also know that as the supercharger comes stock it's prolly got a 8 or less PSI pulley- You'll be able to get other pulleys, but as soon as you do that- you've moved beyond the stocker motors capability to cope with the pressure and you'll have to get into really advanced engine and fuel managment. Good luck- and let me know how it goes!! __________________ Namaste Brunes

06-24-2008, 04:46 PM	#3
hail-bop Command Senior Member Joined: Feb 2008, #4692 Posts: 204 I Don't Crawl I Haul A$$! 2007 Double Cab Automatic 4.0 L V6	I had a dream I had one and it was fun while it lasted.... __________________ Detroit Locker W/ 488's, Stage ll 6" Procomp Lift W/ Steering Stabilizers and Traction Bars. 20" Bronze XD Badlands 35x12.5 Nitto Mud Grapplers, URD CAI, URD MAF Calibrator & LC1 With DB Guage, DT Ceramic coated Long Tube Headers & Magnaflow Cat back exhaust, Thats about it....

07-17-2008, 07:53 AM	#5
wes Junior Member Joined: Dec 2007, #4014 Location: Atlanta Posts: 21 07 Dbl Cab sport silver V6 auto 2007 Double Cab Automatic V6 URD CAI,URD Y-Pipe,URD 3 in. exh,Wet-okle covers,Silverstar headlgt bulbs,Undercover bed cover,black nerf bars,Alpine 9883 Alpine speakers,SIRIUS sat.	CAT converter burnout Adding a supercharger would definitely be fun however the increase in EGT(exhaust gas temp)has been found(by URD) to burn out and clog(causing malfunction)the primary CAT converters after about 50,000 miles.If you plan on your truck being a"lifer" for you i might would rethink the idea-which is exactly what i have done-hope this helps.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-30-2008, 01:25 AM	#4
Spyder327 Senior Member Joined: May 2007, #1677 Location: Phoenix, AZ Age: 21 Posts: 204 2005 X-Runner 2005 X-Runner Manual V6 1GR-FE 4.0L Aquamist 2D meth/water injection kit, URD Exhaust, DT Long Tube Headers, Hood Struts, and lots of other miscellaneous stuff...	There's quite a few people on other forums that have the kit. The pulley it comes with is around 6psi depending on location.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Selling My URD Supercharger Kit	Spyder327	Buy / Sell / Trade	9	12-17-2007 07:26 PM
4L Supercharger	Jesse_Craw	Performance and Tuning	8	10-17-2007 05:03 AM
I need a supercharger	tochicho	2nd Gen. Tacomas	4	10-11-2007 12:58 PM
URD Supercharger count	TheArkansas"X"	Performance and Tuning	1	08-29-2007 02:22 PM
URD Supercharger	TheArkansas"X"	Performance and Tuning	18	08-07-2007 08:19 PM