LSC15's 95 Tacoma 4x4

Go Back   Tacoma World Forums > Tacoma Garage > Performance and Tuning

Notices

Where can I find "Cargo Gates or dividers?"

Reply
 
Thread Tools Search this Thread Display Modes
Old 12-10-2012, 04:13 PM   #1
CVAC085 [OP] CVAC085 is offline
Senior Member
CVAC085 is on a distinguished road
 
CVAC085's Avatar
Firefighter:
Joined: Aug 2012, #85955
Location: Long Island, NY
Gender: Male
Posts: 104
CVAC085's Tacoma Gallery
Where can I find "Cargo Gates or dividers?"

Been looking all over the internet for a cargo gate or a divider at a somewhat of a reasonable price. If you're not familiar with them it's basically 2 bars and a net or some form of plastic that can be used to divide your bed for storage, etc.

Been hunting for one for a few days now and only found 2 cargo bars from wal-mart for $20 each that I have for now. I'd need a mesh net or have to make something of it.

Looked on Amazon, JC Whitney, Realtrucks, Stylintrucks. ANyone have anywhere else I can find one????
  Reply With Quote
Old 12-10-2012, 04:19 PM   #2
670 670 is offline
0~ 0~ 0~
670 is on a distinguished road
 
670's Avatar
Joined: Jul 2011, #60872
Location: Pacific Northfresh/P-Town
Age: 30
Gender: Male
Posts: 59
670's Tacoma Gallery
http://www.shoptrd.com/index.php?i=2...sories&rpage=0
  Reply With Quote
Old 12-10-2012, 04:22 PM   #3
R.O.U.S.
RV7Garage is a splendid one to beholdRV7Garage is a splendid one to beholdRV7Garage is a splendid one to beholdRV7Garage is a splendid one to beholdRV7Garage is a splendid one to beholdRV7Garage is a splendid one to beholdRV7Garage is a splendid one to behold
Army: Veteran - 154th Sig. Bn., USARSO Panama
Name: Paul
Joined: Sep 2009, #22358
Location: Ill Annoy
Gender: Guy
Posts: 631
RV7Garage's Tacoma Gallery
I use 2 spring-loaded curtain rods for load bars. Pretty effective, and really cheap! I'm sure you could find some sort of net to go between 'm.
  Reply With Quote
Old 12-10-2012, 07:00 PM   #4
CVAC085 [OP] CVAC085 is offline
Senior Member
CVAC085 is on a distinguished road
 
CVAC085's Avatar
Firefighter:
Joined: Aug 2012, #85955
Location: Long Island, NY
Gender: Male
Posts: 104
CVAC085's Tacoma Gallery
I should've specified I no longer have a bed rail because it's now used for my BakFlip G2 cover I just had installed. Plus these are so expensive! Ughhh!! Thanks for that link, I'll check out the site in a bit.
  Reply With Quote
Old 12-10-2012, 07:01 PM   #5
CVAC085 [OP] CVAC085 is offline
Senior Member
CVAC085 is on a distinguished road
 
CVAC085's Avatar
Firefighter:
Joined: Aug 2012, #85955
Location: Long Island, NY
Gender: Male
Posts: 104
CVAC085's Tacoma Gallery
Quote:
Originally Posted by RV7Garage View Post
I use 2 spring-loaded curtain rods for load bars. Pretty effective, and really cheap! I'm sure you could find some sort of net to go between 'm.
I have 2 bars I purchased from wal-mart $20 a piece. I just need something to fit in between them like a mesh netting or something which I seem to have difficulty finding.
  Reply With Quote
Old 12-10-2012, 07:32 PM   #7
www.BeLikeBrit.org
fletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shedfletch aka is one of the sharper tools in the shed
 
fletch aka's Avatar
Name: Gary
Joined: Jan 2009, #12223
Location: Left Coast
Gender: Male
Posts: 7,566
fletch aka's Tacoma Gallery
Quote:
Originally Posted by CVAC085 View Post
I should've specified I no longer have a bed rail because it's now used for my BakFlip G2 cover I just had installed. Plus these are so expensive! Ughhh!! Thanks for that link, I'll check out the site in a bit.
I have a fold a cover that opens at the front as well as the back, At the cab end I have two milk crate type totes held by a load bar between the wheel wells, at the tailgate I have one more held by a bungie cord to one of the D-rings.


  Reply With Quote
Old 12-11-2012, 07:50 PM   #8
CVAC085 [OP] CVAC085 is offline
Senior Member
CVAC085 is on a distinguished road
 
CVAC085's Avatar
Firefighter:
Joined: Aug 2012, #85955
Location: Long Island, NY
Gender: Male
Posts: 104
CVAC085's Tacoma Gallery
I was looking for something reasonable (not so much cheap) and will fit under a bakflip bed cover. I'll check that out thanks!!!

Quote:
Originally Posted by fletch aka View Post
I have a fold a cover that opens at the front as well as the back, At the cab end I have two milk crate type totes held by a load bar between the wheel wells, at the tailgate I have one more held by a bungie cord to one of the D-rings.


I have 2 of the bars I got from wal-mart at $20 a pop and I bungee'd a shovel and snow brush to it for now for the winter. Have to do some logical thinking about how to make of that situation. Good idea with milk crates. I think I can find some lying around!
  Reply With Quote
Reply

Products Discussed in this Thread

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
A "What The Hell" Feeler: Custom Tube-Gates 2TRunner 2nd Gen Tacoma Marketplace 9 05-06-2013 02:07 PM
Cargo Dividers Innkeeper271 2nd Gen. Tacomas 11 04-06-2011 11:47 AM
I cant find a "How to" install 3" Revtek. perogie2328 Suspension 4 08-10-2010 01:04 PM
be honest. have you ever had any "cargo" fall out of your truck? aficianado 2nd Gen. Tacomas 66 06-07-2010 10:19 AM
Cargo dividers are back Outlaw 2nd Gen. Tacomas 11 05-21-2010 04:59 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.