Does the exhaust fightment from other models?

Does anyone know if the rear exhaust from a 2nd Gen Tacoma or a first Gen Tundra will work on a Ist gen Tacoma? The only differnce seems to be the location of the hangers other than that I assume the bends would be very similar. Im looking to use Dynomax/Walker part number 54669 (rear exhaust for 05 and up Tacoma 2.5 O.D.), 55091 (rear from 06 and eairlier Tundra 2.5 O.D.) or the 54653 (rear from 00 and earlier Tacomas 2.25 O.D.) Thanks in advance for any information.

 

All three are totally different.

Tundra and T100 MIGHT have some compatibility, but not with the Tacoma of either generation.

 

Any suggestions? My stock exhaust is about rusted out and the muffler split a long time ago. I bought a Dynomax Ultra that came from and exterra kit Center in offset out that I intend to use I just thought it would be easier if I could make one of these pre bent rear sections work.

 

A good muffler shop can bend up a complete system with a good Magnaflow muffler for a few hundred bucks.