Urd MAF cal

So my urd MAF cal is waiting at my house for me to get home and install it how many on here have done this and is it hard .. I've got lots of experience with being a mechanic so can't wait to get home and install it to see if it actually makes a different

 

I'm very interested in seeing the results on this. It wasn't until recently I read that we could actually use this on the 09+ vehicles. Just no plug and play. That means we are not totally screwed for mods right? Def want to see how this turns out.

 

They said it would work I have a 2013 with volant intake and magnaflow catback so we shall see just hate it has to be wired in

 

Yeah I hear it can be calibrated to Match the mods on a specific vehicle. Ok that's what I wanted to check in on, still gotta splice wires huh?

 

opcorn:

 

Yea still have to splice into ecu wires .. I won't be able to install it till Wednesday night or Thursday in still in North Dakota at work and truck is in Mississippi at home

 

Well that's a shame. Hope they come out with the harness plugs by the time my warranty is up. I just don't like the idea of cutting it all up. I would like to see the results of your installation though.

 

I'll post it on here when i get it installed

 

Looking forward to see the results too!

 

Well she is installed and must say it has better throttle response and fills a good bit stronger 2wd is useless if you stomp it.. Would have liked to dyno it before and after but it feels stronger anyways .. Not to hard to install but you are working in a tight space but all in all it's easy if you follow instructions

 

Sweet! How long did the installation take?

 

About two hrs

 

Correct me if I am wrong, but now that it is installed ( not being plug and play) do you change the programming by getting a custom tune sent to you from URD? I assume the tune is based on mods and tried to cover the middle ground best it can. Then you upload that tune to it? I could be way off base here but I just learned that this thing was actually an option if you are willing to cut wires.

 

They tune it before it's sent to you based on your mods you tell them you have but it can also be tuned again if you want

 

My concern is getting it all wired in there and then wanting to add something else later on.

 

They send the soft ware to wine with I'm sure you could log somehow and they send you a tune

 

did you solder the wires in? or just use a t-tap type of connector?

 

I used butt connectors and heat shrink

 

gotcha, just wondering for if i ever buy one haha

 

You are lucky. You have an 08 so you can just buy the harness and plug it in.