1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Where to buy AFE Pro Dry S filter? True Flow-XDI CAI installed !! Magnuson TRD supercharger spark plugs 1GR-FE Billet Anodized Fuel Rails *** TRD SC approved *** URD Stainless 3'' Mark 3 vs. JBA 2.5 inch Which AFE intake to buy.

installing URD MAF cal with map sensor

Discussion in 'Performance and Tuning' started by turbotime, Apr 9, 2015.

  1. Apr 9, 2015 at 5:58 PM
    #1
    turbotime

    #1
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    hello have a 2010 toyota tacoma with a turbo on it. Im just curious if anyone has used it and any tips on installation thanks .
     
    turbotime, Apr 9, 2015
    #1
  2. Apr 9, 2015 at 6:00 PM
    #2
    Justus

    #2
    Justus fucks not given

    Joined:
    Jan 4, 2013
    Member:
    #94417
    Messages:
    9,230
    Gender:
    Male
    First Name:
    Nabisco the kid
    In ur toolbox
    Vehicle:
    not so low, not so slow 2006 6 lug
    stockish
    ur best bet IF U BOUGHT IT NEW FROM URD, is to call Gadget (ext 3) at urd and ask them.

    Id love to see pics of this turbo setup tho, we dont have many of those!
     
    Justus, Apr 9, 2015
    #2
  3. Apr 10, 2015 at 7:23 AM
    #3
    Torspd

    #3
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,687
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Pics and what he said^^^ .

    What size injectors, type/size of turbo, and oh yeah, where are those pictures already?!?!?!?!
     
    Torspd, Apr 10, 2015
    #3
  4. Apr 10, 2015 at 7:18 PM
    #4
    shr133

    #4
    shr133 Well-Known Member

    Joined:
    Jul 8, 2013
    Member:
    #107900
    Messages:
    2,215
    Gender:
    Male
    First Name:
    Steve
    Muskego, WI
    Vehicle:
    2010 V6 Sport
    K & N filter, 275 70 17 Cooper AT3, OME Nitrocharger shocks, 884 Springs, Dakar leafs.
    I have one on a N/A truck so I can really help but it works good.... I do have tips... on the factory mapping...
    1. In closed loop it will try to maintain 14.5 f/a ratio so it will run lean
    2. in open loop it runs rich about 10 f/a ratio
    3. add more fuel for 5000 and above rpm
    4. tune with a laptop in the truck, it shows you what throttle position you are at so you can make easy adjustments...
    5. you need less fuel below 1.5v and more after
    5. tune it section by section, cruise, light accel, heavy accel, full throttle ect....
    6. With a turbo I would get a f/a ratio gauge right away to play it safe...

    Have fun I wish I had a turbo...
     
    shr133, Apr 10, 2015
    #4
  5. Jun 21, 2015 at 10:09 PM
    #5
    eivad1

    #5
    eivad1 Active Member

    Joined:
    Apr 21, 2013
    Member:
    #102488
    Messages:
    26
    Gender:
    Male
    First Name:
    dave
    canyon lake ca
    Vehicle:
    2007 toyota tacoma 2wd
    stock
    well long wait for pics of the turbo set up dont u think
     
    eivad1, Jun 21, 2015
    #5
  6. Jun 22, 2015 at 5:23 AM
    #6
    Torspd

    #6
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,687
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Have an easier time looking in my build thread....
     
    Torspd, Jun 22, 2015
    #6
  7. Jul 28, 2015 at 8:08 PM
    #7
    turbotime

    #7
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    Hello sorry guys I have been to busy to even hook it up, the truck runs great I have 38000 miles on it with the turbo I was just going to tinker with its what I do. I will try and get around to taking some pics, I'm hoping sooner or later I will have them available as a direct bolt on turbo kit. Thanks for all your help just wished i could figure out why I'm getting stupid lean codes I have tried almost everything.
     
    turbotime, Jul 28, 2015
    #7
  8. Jul 28, 2015 at 8:26 PM
    #8
    Torspd

    #8
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,687
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    I bet you have a vacuum leak.
     
    Torspd, Jul 28, 2015
    #8
  9. Jul 29, 2015 at 1:20 PM
    #9
    turbotime

    #9
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    I have tested for that i have even used a smoke machine, I do know that when i look at my fuel trim its right on the edge of the spec and my maf at idle is around 3.5 to 5.5 has to be something stupid the truck runs to good.
     
    turbotime, Jul 29, 2015
    #9
  10. Jul 29, 2015 at 3:13 PM
    #10
    Torspd

    #10
    Torspd Tor-nication

    Joined:
    Sep 18, 2009
    Member:
    #22958
    Messages:
    25,687
    Gender:
    Male
    First Name:
    Tor
    The Great America!
    Vehicle:
    MMVI 4.4L 4x4 Access Cab
    Torspd Custom Turbo kit [] Borg Warner 9180EFR Turbo [] Haltech Elite 2500 [] TiAL Q BOV [] TiAL V44 Wastegate @ 15psi [] CP Pistons [] CP Carrillo Rods [] ARP Head studs [] ARP Main Studs [] ARP Header - Head Studs [] Ported Heads w/ 1mm oversized valves intake/exhaust [] Brian Crower Forged Stroker Crank [] Darton M.I.D. Sleeved Block [] Kelford Camshafts [] Torspd 160* T-stat mod [] APR Large Fuel Rail [] Walbro 460 LPH E85 Fuel Pump [] FueLab FPR [] APR T56 Conversion Kit [] KP RACING Built T56 [] McLeod Racing Custom Twin Disk Clutch [] One Piece Aluminum Driveshaft [] MGW Shifter [] Custom lowering kit [] Ohlins Front Coilovers [] QA1rear shocks [] Custom Ron Davis Radiator [] Dual SPAL Electric Fans []
    Smoke machine won't show you any smoke, if non is leaking out. What I mean, is that if you have vacuum hoses routed in such a fashion that it causes what the ecu believes is a "vacuum leak".
     
    Torspd, Jul 29, 2015
    #10
  11. Jul 30, 2015 at 11:33 AM
    #11
    turbotime

    #11
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    Yes I agree with that, I must be missing something or have something routed wrong I think I have tried ever thing else.
     
    turbotime, Jul 30, 2015
    #11
  12. Aug 4, 2015 at 2:34 PM
    #12
    turbotime

    #12
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    I guess i need to get some more people involved I hope it just something hooked up wrong or routed wrong .
     
    turbotime, Aug 4, 2015
    #12
  13. Aug 4, 2015 at 3:38 PM
    #13
    Justus

    #13
    Justus fucks not given

    Joined:
    Jan 4, 2013
    Member:
    #94417
    Messages:
    9,230
    Gender:
    Male
    First Name:
    Nabisco the kid
    In ur toolbox
    Vehicle:
    not so low, not so slow 2006 6 lug
    stockish
    Won't find any better than Tor here imho
     
    Justus, Aug 4, 2015
    #13
    Torspd likes this.
  14. Aug 5, 2015 at 8:52 PM
    #14
    turbotime

    #14
    turbotime [OP] Member

    Joined:
    Jul 13, 2014
    Member:
    #133839
    Messages:
    18
    Gender:
    Male
    Thats what I'm learning I wished he was in utah.
     
    turbotime, Aug 5, 2015
    #14
  15. Aug 5, 2015 at 9:01 PM
    #15
    Justus

    #15
    Justus fucks not given

    Joined:
    Jan 4, 2013
    Member:
    #94417
    Messages:
    9,230
    Gender:
    Male
    First Name:
    Nabisco the kid
    In ur toolbox
    Vehicle:
    not so low, not so slow 2006 6 lug
    stockish
    :headbang:
     
    Justus, Aug 5, 2015
    #15

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.67
ABS Plastic Sheet 3-pack 12" X 24" X 0.0625" (1/16") 3 Pack, Black Haircell, for VEX Robotics Teams, Hobby, DIY, Industrial. Easy to Cut, Bend, Mold.
$21.99
E-cowlboy for Toyota/Lexus Crankshaft Damper Pulley Holding Holder Harmonic Tool with 2PCS Crank Bolts
$21.99
AEM (30-4110) UEGO Air/Fuel Ratio Gauge
$166.29
ARB CKMA12 On-Board Air Compressor High Performance 12 Volt for Air Locker Differentials and Tire Inflation
$323.00
BG 44K Fuel System Cleaner Power Enhancer 11oz.
$24.95
ALEOED M12x1.25 mm Self-Locking Nylon Insert Hex Lock Nuts, Pack of 6
$12.99
Hayden 679 Universal 11” Rapid-Cool Add-On Transmission Cooler to Enhance Cooling (not for direct replacement of the factory unit)
$51.60
Spectre Performance 81413 Mass Air Flow Sensor Adapter
$20.63
Lawson Industries 66906 Stainless Steel Stamped Y-Pipe
$20.27
Audak 1 Pair 3" Aluminum Mounting Bracket Tube Clamp for Bullbar Roof Rack Roll Cage (75-77mm/2.95-3.03" Adjustable)
$20.99
Sutemribor 304 Stainless Steel 7-21mm Single Ear Hose Clamps Assortment Kit, 128PCS
$20.99
Michigan Motorsports Mass Air Flow Sensor Harness 24" Fits Denso 5 Wire pin MAF Fitment for Tacoma 4 Runner
$19.98
Henry Barrier BLUESKIN WTHR 4INX50FT BH200WB4559
$23.48
Keco 100ft – 1" PET Expandable Braided Cable Sleeve – Wire Sleeving for Audio Video and Other Home Device Cable Automotive Wire - Black
$22.99
BlueDevil Products 00202 Complete Fuel System Cleaner - 16 Ounce
$24.26
GM LS-Series Engines: The Complete Swap Manual (Motorbooks Workshop)
$24.49
CBM Motorsports - cbm-10827 Billet Fuel Line Adapter for 5/16 Hard Line to -6AN
$24.99
EVIL ENERGY 30 Micron Inline Fuel Filter with 6AN 8AN 10AN Adapter Universal 60MM
$23.99
Spectre Performance 8741 Black 3" Air Duct Hose
$23.99
Fastronix 3/8" 4 Stud Stainless Steel Power Distribution Block with Cover
$23.99
ESPEEDER Universal Oil Catch Can Kit Baffled Reservoir Tank Aluminum Red 300ml Kit
$24.99
ICT Billet Straight -10AN Flare Male to 1/2" NPT Taper Pipe Turbo Drain Adapter Fitting Black Anodized Designed and Manufactured in the USA F10AN500NPXL
$24.99
Continental OE Technology Series 4070834 7-Rib, 83.4" Multi-V Belt
$26.13
Blue Demon 308LFC-O X .035 X 1# Spool stainless steel flux cored gasless welding wire
$25.33
Cuztom Tuning 1LB Premium Cylinder Stainless Steel Manual/Automatic Transmission Heavy Weighted Shifter Gear Shift Knob Selector
$33.99
EVIL ENERGY Baffled Oil Catch Can,Oil Separator Catch Can with Breather Filter 300ml Universal Aluminum
$35.19
aFe Power MagnumFLOW 90-50000 Air Filter Restore Kit (Single, Gold)
$34.88
Knipex 8801-10 10" Alligator Water Pump Pliers
$35.40
Heli-Coil Helicoil 5546-6 M6 x 1 Metric Coarse Thread Repair Kit
$34.04
ARP 912-0001 Thread Cleaning Chaser, M8 x 1.25"
$34.94
3" Inlet NETAMI Glossy Real Carbon Fiber Stainless steel Exhaust Muffler Tip 3" Inlet/4" Outlet) Chrome Polished
$35.89
4x HPS 2.64"-2.95" (67mm-75mm) Marine 316 Stainless Steel T-Bolt Hose Clamp 2-3/8" (60mm) Hose ID
$37.15
Bosch 0261231006 Original Equipment Engine Knock Sensor - Compatible With Select Porsche 944, 968; Saab 900, 9000; Volvo S90, V90, 240, 244, 245, 740, 745, 760, 780, 850, 940, 960
$37.83
DIYAutoTune GM Closed Element CLT or IAT Sensor with 6' Pigtail
$22.25
OTC 4524 Stinger 45° Hose Clamp Plier , Red
$22.35
iCrimp SN-025 Dupont Crimper, O Crimp Tool, D-sub, Dupont Connector Wire Crimp Tool AWG 28-18(0.1-1mm²) for Harwin, Amphenol MINI-PV Connectors Molex KK 396 Micro Timer Connectors
$22.29
RUSSELL/EDEL 610165 Full Flow Hose Endswivel 90 Deg -6An All Blk Finish
$23.84
Gumout Expert Series Regane (Fuel System Cleaner)
$23.50
Edelbrock 632050 ProFlex -6AN Stainless Steel Braided Hose - 3 Feet
$22.95
Lang Tools 436A Exhaust Hanger Removal Pliers
$23.24
Design Engineering 10071 Heat Screen 12" x 24" Adhesive Aluminized Mylar Radiant Matting
$26.99
To Top