OBX Racing Headers

The_Hodge · Mar 25, 2008

no friggin idea

roxspin72 · Mar 25, 2008

jhodge83 said: ↑

u should be ok if u get the long tubes, as long as u do the o2 simulators. urd sells those as well i believe. for emissions here, they pop in a scanner and make sure ur throwing no codes. if u really want a down and dirty on what u can get by w/, go by ken's muffler shop here in fayetteville by the sams slub enterance and talk to the 40ish y/o looking guy w/ brown hair/mustache and he'll give u the down and dirty of what u can get by w/...especially if u want them to do any work. i asked them about getting them to cut out the rear cats and pipe it in and they said that by law they couldnt touch anything already there from the factory. but i mentioned to him about the y pipe and he said that'd be the best way to go. they welded on my sliders and welded my piping on my magnaflow exhaust b/c the catback came w/ the glorified hose clamps and they were leaking at the muffler on both sides.
Click to expand...

Thanks, I will talk to those guys. I know the shop. Did the weld work come out to standard. I mite seal up everything once I complete the sytem. Borla has alot of clamps also, and I know they do come loose.

The_Hodge · Mar 25, 2008

roxspin72 said: ↑

Thanks, I will talk to those guys. I know the shop. Did the weld work come out to standard. I mite seal up everything once I complete the sytem. Borla has alot of clamps also, and I know they do come loose.
Click to expand...

yeah, its sealed up now. i kept the flange where the y-pipe connects to the catback. not the prettiest, but it works...it was getting clse to closing time. now the welds for the sliders are a lot better. they grinded down on the frame, welded them in, cleaned em up a lil, then went back and sprayed black paint over all the welds and the bare spots on the frame to look like normal.

05PreRunner · Apr 2, 2008

I want the Doug Thorley Long tube Headers.....but..........do you guys think it would be TOO Loud (as "pull me over" loud?). I have a True Flow intake, and an exhaust. I really want the headers...........

utixrunner · Apr 2, 2008

05PreRunner[OP] said: ↑

I want the Doug Thorley Long tube Headers.....but..........do you guys think it would be TOO Loud (as "pull me over" loud?). I have a True Flow intake, and an exhaust. I really want the headers...........
Click to expand...

if you have the stock y-pipe you should be fine

tacomaman06 · Apr 3, 2008

utixrunner said: ↑

if you have the stock y-pipe you should be fine
Click to expand...

agreed....and if you cut out the two rear cats and have straight pipe welded in....it would be real loud(but it would sound pretty good,imo).

Log in or Sign up

Welcome to Tacoma World!

OBX Racing Headers

#21
The_Hodge Volunteer Moderator

#22
roxspin72 Enjoying my addiction

#23
The_Hodge Volunteer Moderator

#24
05PreRunner [OP] "Living life in the FAST lane..."

#25
utixrunner I <3 Boost

#26
tacomaman06 Carolina Alliance: Enforcer

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

OBX Racing Headers

#21 The_Hodge Volunteer Moderator

#22 roxspin72 Enjoying my addiction

#23 The_Hodge Volunteer Moderator

#24 05PreRunner [OP] "Living life in the FAST lane..."

#25 utixrunner I <3 Boost

#26 tacomaman06 Carolina Alliance: Enforcer

Products Discussed in Entire Site Forum: Performance and Tuning

#21
The_Hodge Volunteer Moderator

#22
roxspin72 Enjoying my addiction

#23
The_Hodge Volunteer Moderator

#24
05PreRunner [OP] "Living life in the FAST lane..."

#25
utixrunner I <3 Boost

#26
tacomaman06 Carolina Alliance: Enforcer

Products Discussed in