Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Performance and Tuning (http://www.tacomaworld.com/forum/performance-tuning/)
-   -   Flowmaster for 08 Tacoma (http://www.tacomaworld.com/forum/performance-tuning/15191-flowmaster-08-tacoma.html)

nc1100c 09-25-2008 03:31 PM

Flowmaster for 08 Tacoma
 
Im thinking about installing a Flowmaster muffler on my 08 Tacoma instead of buying a cat back system. I dont want too loud of a muffler. A friend of mine has a 40 , it sounds good ,but just too loud for me. Im thinking a 50 or even a 70 series. I really just want one alittle louder than stock.
Does anyone know the Flowmaster part number for the 50 or 70 series Flowmaster that will fit on the 08 exhaust pipe? What is the size of our exhaust pipes?

tacoskim 09-25-2008 03:33 PM

i give bout 20 secs till tacomaman jumps on this thread

jarroddorraj 09-25-2008 03:35 PM

get the flowmaster 50 series SUV muffler, got it on my 06 and it sonds great. Not too loud just that good rumble flowmaster is famous for but quiet in the cab

jolayiv 09-25-2008 03:37 PM

Quote:

Originally Posted by tacoskim (Post 186452)
i give bout 20 secs till tacomaman jumps on this thread

I was thinking the same thing. I went to the muffler shop and they told me to get either a 2.25 or 2.5 offset in and center out ( O/C ). Don't take that as gospel. I plan on going with the 40 delta but a lot of people seem to like the 50 series.

tacoskim 09-25-2008 03:45 PM

wow this is a first, tacomaman where are u!!!!

jolayiv 09-25-2008 03:47 PM

Quote:

Originally Posted by tacoskim (Post 186459)
wow this is a first, tacomaman where are u!!!!

I think we should go ahead and post his sound clips. What do you think?

tacoskim 09-25-2008 03:54 PM

sounds like a good plan

tacomaman06 09-25-2008 03:58 PM

im here.....i got waylaid!!!:D

you can use about whatever size inlet/outlet that you wanna use really, when you weld it ion......you'llbe bridging the gap anyway. the 2.5 inch piping works well though, so you could get one with an offset in/ center out and that will work fine. and if you dont want loud....go with the 50 series.

tacoskim 09-25-2008 04:02 PM

yay he made it! u got me nervous there for a second!!

tacomaman06 09-25-2008 04:02 PM

Quote:

Originally Posted by tacoskim (Post 186483)
yay he made it! u got me nervous there for a second!!

:laugh:

Ben_Schwarz_09 09-25-2008 04:15 PM

so to fit the '08s we need a 2.5 in/out & and offset in with a centered out?

tacomaman06 09-25-2008 06:54 PM

Quote:

Originally Posted by Ben_Schwarz_09 (Post 186503)
so to fit the '08s we need a 2.5 in/out & and offset in with a centered out?

actually, you can use whichever one you want to, as the pipe can be ran to accomodate, but thats the one i used on the 06 i had.

nc1100c 09-26-2008 09:37 AM

Ok, thanks for all the input but Im still confused about which one to order. What is the flowmaster model number for a 50 series? Should I get the 2.25 size or the 2.5 size? Is it center in off set out?
Thanks

jolayiv 09-26-2008 11:40 AM

Quote:

Originally Posted by nc1100c (Post 187156)
Ok, thanks for all the input but Im still confused about which one to order. What is the flowmaster model number for a 50 series? Should I get the 2.25 size or the 2.5 size? Is it center in off set out?
Thanks

I'm not telling you this is the one you should get but if I were to order one I would get the 2.5 in and out, offset in center out O/C. Model: 942551.

tacomaman06 09-26-2008 11:40 AM

Quote:

Originally Posted by nc1100c (Post 187156)
Ok, thanks for all the input but Im still confused about which one to order. What is the flowmaster model number for a 50 series? Should I get the 2.25 size or the 2.5 size? Is it center in off set out?
Thanks

not really sure exactly sure what the model number is, but 2.5 in and out will be fine. center in/offset out will work fine too.

papabear050 10-05-2008 12:17 PM

How about center in and center out? It's only 84 bones, while the offset is 134 bucks.... same muffer

tacomaman06 10-05-2008 01:04 PM

Quote:

Originally Posted by papabear050 (Post 195933)
How about center in and center out? It's only 84 bones, while the offset is 134 bucks.... same muffer

that will work fine too.........they will just bend the pipe a bit to get it to run where needed to be.

nc1100c 10-05-2008 06:28 PM

Where did you find the muffler for $84.00 at?

papabear050 10-05-2008 06:48 PM

PM Sent.

lyonmat 10-13-2008 05:59 PM

Can you post the link where you got that for 84 bucks, i need to pick one up as well.


All times are GMT -7. The time now is 01:44 AM.