Flowmaster exhaust Question

I just had a Flowmaster 50 series Delta installed on my 07 Access cab yesterday and it is too quiet for my liking. I'm wanting to either get a 40 series or a regular 50 series off eBay and switch it out. What specs fit the Tacoma as far as inlet and outlet dimensions go? thank you

 

i have a 40 with duals, but a 2.5 or 3 inch in/out center, and it doesnt have to be offset will work for ya.

by the way......go with the 40,you will be much happier,guaranteed!!!

 

Thanks for the replies fellas; I'll be getting a 40 series off eBay this next month. What dimension size should i look for (C/O, 2.5/3, etc.)? For some reason the Flowmaster catalog does not list 2nd gen tacos.

 

2.5/ 3 will work. if you get a shop to install it, all they will do is bridge the gap when they weld it, so you will be good to go.

 

That's what I was looking for; thank you!!

 

I just bought my truck and it had a flowmaster on it... Not too loud but just not my style so i had it removed..
$40.00 plus shipping if you are interested?? PM me or email me.
10x13 picture attached... Truck has 43K on it... I have no clue on how long the muffler had been on?
2.5 intake (the pipe welded on it 2 1/4od)

I thought it sounded great i just didn't want the Ricer sound..

 

i have 40 series and it sounds awesome. get 3in pipe from the headers back

 

Also if you are looking to make a little more noise around the neighbor hood you can cut off the exhaust at the outlet and angle it down slightly ( i used a piece about 6" long and it was just a 45 degree angle down) ..it will make a definate change in sound, but be warned if you dont angle it down and just leave it coming straight out, all of that stuff coming out of your exhaust will get all over your rear end and corrode everything.

 

Hi guys , sorry for my Inglish , I am from Puerto Rico and I have 07 X runner . I wnt to put a Exhaust system , I dont know what is the best system.
Thanks

 

I looking for a good performance and a good sound. If you can help me , I appreciate

 

Well it all depends what kind of sound you are looking for and the emission standars in your area play a small role as well......

 

I think to put the y pipe from URD with the stock exhaust , and a Flowmaster 44 . What you think. thanks

 

i think it will sound good and throaty!!!

 

I think that, give me a good performance

 

should be good for a little performance gain, and you may want to get the urd maf calibrator and maybe a urd tcai...............it will equal a very nice performance gain for your x-runner i think.

 

yeah I want urd tcai , look nice

 

you think that the flowmaster is good or you tray another muffler?

 

i will always stay with my flowmaster......i just love the flowmaster rumble!!
here is my soundclip, Rafi........ this is on my 4.0 prerunner.

 

just put the 40 series delta flow on my 07v6 andhonestly its a little to quite for my liking. i want it loud and mean

 

have you heard what the super 44 sounds like??? its the loudest muffler that flowmaster has out......and it sounds really good and loud.

on your exhaust, you may want to cut the tail pipe a little way back from the muffler and put a turn down on it......should make it good and loud for ya.