Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   RuffStuff Specialties (http://www.tacomaworld.com/forum/ruffstuff-specialties/)
-   -   The Ruffstuff NOT Universal 4 Link Kit! (http://www.tacomaworld.com/forum/ruffstuff-specialties/245324-ruffstuff-not-universal-4-link-kit.html)

Dan Fredrickson 10-23-2012 08:25 AM

The Ruffstuff NOT Universal 4 Link Kit!
 
First off I should explain my thoughts so this dosen't sound too strange to you guys.

A few years ago I started seeing brackets that completely disregarded all the rules about Link Suspensinons as we knew them to be. The changes that have come to be accepted as the way to do it no longer care about seperation, not vertical or linear. Did those rules change overnight? No, they didn't. What changed was a few companies saw a way to make things easier, for them and the many people that bought into the idea. Now every company making anything for link suspensions has these. Why don't we?

We do not make a combination upper/lower link bracket with 4" (or less) of vertical seperation and no inches of linear seperation. I simply do not agree with it. It certainly makes installations easier but it also limits you to only what you can do using that type of bracket.

Our Link Brackets are not holding you to any pre-determined limits. Our Link Brackets ALLOW you to make your rig work as well as you can design it. Not limiting you in any way.

I know I am going to get some flack for this but I believe everyone is entitled to an opinion and this is mine. Anyway here they are, our new 4 Link Kits!

For Framed Rigs

http://pics.ruffstuffspecialties.com...g?m=1304950586

This is it, everything in one package for a great price, and not low end stuff just to be cheap either! The kit is wrapped around 8 of our 1.25" Heat & Cryo Treated 78,000lb+ RSL Chromoly Heims with Stainless High Misalignment, Zink Plated Jam nuts, and 1.5" Tube ID Weld Bungs. Not a cartridge type joint in sight.

The Upper Frame brackets are our 25 degree 5 way Adjustable link brackets. The Lower Frame brackets are our venerable Chassis Link brackets, time tested and proven for optimum performance.

For the axle end we have our Axle Mount Link brackets and our New Truss that we have refined for additional strength while shedding uneeded pounds. On the Truss we keep it simple with 4 of our 3/8" thick Flat Bottomed Link Tabs.

For Tube Chassis Rigs

http://pics.ruffstuffspecialties.com...g?m=1304950590

Everything on the axle is the same as the other but the tube side is different.

The Upper Chassis brackets are our 10-35 Degree 5 Way Adjustable Tube Mount Link brackets. The Lower Chassis brackets are 10-35 Degree 3 way Adjustable Tube Mount Link brackets for optimum performance.

The only choice you need to make is if the Truss needs to span a Large third member (D60, D70, 14 Bolt, Sterling, Eaton, Dodge 9.75, etc...) or a Medium sized third member (Ford 8.8, D44, Ford 9", Toyota, etc...). If you want to make more changes give us a call and we can see what we can do!

These are on Special @ $722.50 for the framed and $663 for the tubed as you see them, about 15% less Than normal prices...

http://www.ruffstuffspecialties.com/catalog/34LINK.html

Dan Fredrickson 11-04-2012 06:52 PM

Ditch the leaf springs!

Dan Fredrickson 12-10-2012 08:16 AM

Thank you for all of the orders guys!

Dan Fredrickson 01-02-2013 10:56 AM

Upgrade to the RUFF STUFF!

Dan Fredrickson 02-13-2013 10:03 AM

The right way to link any rear end!

Dan Fredrickson 04-27-2013 09:55 AM

A link kit helps bring your rigs true potential out!

Dan Fredrickson 05-10-2013 09:03 AM

When swapping out that axle, swap in a 4 link kit to add articulation!

Dan Fredrickson 06-07-2013 07:48 AM

Time for an upgrade!

Dan Fredrickson 06-19-2013 10:22 AM

Nothing better than a linked suspension!

Dan Fredrickson 07-20-2013 06:44 AM

Don't leave home with a link kit under your rig ;)

Dan Fredrickson 08-09-2013 09:29 AM

You just can't go wrong with a 4 link!

Dan Fredrickson 08-21-2013 06:57 AM

Ready to give your offroad experience an upgrade?

Dan Fredrickson 09-05-2013 08:16 AM

The kit you don't want to skip on!

Dan Fredrickson 09-12-2013 11:01 AM

Thanks for keeping us so busy!

Dan Fredrickson 10-02-2013 10:44 AM

Build season is coming, get ready!

Dan Fredrickson 10-15-2013 09:46 AM

Trust me, this is good to have when you need it!

Dan Fredrickson 10-28-2013 07:59 AM

Thanks for another busy weekend guys!


All times are GMT -7. The time now is 05:52 AM.