what size terra grapplers to get

I have a 2011 tacoma 4x4 trd sport with a 3" readylift sst kit. what's the largest terra grapplers i can get that will fit without any further modifications?

 

Stock 17" Sport wheels? = 265/70-17

If you have aftermaket wheels or wheel spacers you can go up to 285/70-17 with only minor trimming.

Btw welcome to TacomaWorld! Check my sig for the 559 thread.

 

285/70 17's

 

I have 295/70/17 tg's with a 3'pro comp lift and LR UCA's. minor trimming on inner fender well no cab mount chop. no spacers.

 

thanks for all the info...by the way what is "LR UCA's" are you running stock 17" sport wheels with your 295/70/17's. that's the size im looking to get, but didn't want to buy wheels yet.

 

LR UCA = "Light Racing Upper Control Arms"

I'm pretty sure k9cop is also running aftermarket rims, since he sold his factory rims here:

http://www.tacomaworld.com/forum/bu...oma-trd-tires-wheels-16-inch.html#post3171134

Typically you either need a new rim with more negative offset than the factory rim, or spidertrax wheel spacers, to run a wider tire. I personally favor a 0mm offset rim. Many folks run -6 or -12.

 

from the online tire size calculator


You will be doing a lot of trimming with 295's guys chop the cab mount to fit 285's without rubbing. But that's for off road rubbing not street. You will defiantly need wheel spacers if your running the stock wheels.

 

I have pro comp 7047 wheels with I think 5.5 offset. BjMoose was right sold my stock wheels. Truck came with stock 16". I have no rubbing issues. But, my truck is a street queen. light offroading to get to fishing holes. If you are going to due major offroading you might want a different tire. You will probably encounter rubbing.

 

Pics!

 

workin on it. I suc at computers but, they are on their way.