Spindle lift questions?

What are you going to use for the rear lift? Make sure you get the hub centric wheel spacers also.

 

so my overall lift plan

front already has 2'' skyjacker leveling kit
was going to keep those and add the maxtrac spindle

rear already has 1'' block
I have nontsb rear, so gonna get an add a leaf (last time I added one, I got over 2'') and if I need to replace the 1'' block with 2'' block, i will

yea as for spacers, I'm crusing tw for spidertrax, but do you think 1'' bora's will work? I wanted wheels to stay as close to car as possible, honestly, right now, they stick out more than i'd like

 

For a better ride up front I would probably just add ome 884's to 5100's set at 0. In the rear if you are wanting to do an add a leaf I would do the icon or wheelers 3 leaf progressive pack and you can still use your overload spring. Also would look into a beefed taco carrier bearing drop bracket. Just my 2 cents but think you will be happier with the ride this way.

 

I really appreciate the info, I did want the 5100's but since i'm on a budget build, i prob gonna stick with my stock shock, and for the rear, those sound like great options, i even saw your leaf springs for sale, but a single add a leaf is cheaper and a block is nearly nothing, I am def gonna look into the beefed taco carrier bearing drop, thanks!

 

damn i forgot another part i needed, i prob need longer rear shocks, so i'm gonna go with the extended 5100's

 

def will need longer shocks

 

Brake lines too

 

thanks tony, the spindles do come with 1 set of lines, I was thinking bout using those for the rear if I didn't need them for the front does that sound reasonable, or will i need them for the front too?

 

I believe you'll need them for the front and back. Plus for the rear it is only 1 line going down to the hard lines on the axle housing IIRC