What Have You Done To Your 2nd Gen Tacoma Today?

Your right. Looks good. I like it. Rock on VagLock! Kidding, thought your screen name was funny to poke at.

I had considered color matching the chrome Stars on my wheels. Decided not to since I am selling them soon.

 

which one?

 

Thanks skygear, I used the Plastidip to see if I liked it. Hope to get them color matched in the near future. Have not located any rattle can paint to match the BRM paint yet.

 

I also adjusted my light bar this evening after it got dark

 

Removed the Dakar leaf pack:



You can remove the bolts on the "military wrap" easily, but ONE of them requires you to relieve the tension with a C Clamp. This is a 6" clamp.



You can just remove the nut on the center pin bolt with no clamp. It'll unload gradually.


New leaf in front of the unloaded pack. Where does it go?


Well, it's easy. You can't miss it. Just keep pulling leaves off the top until you come to the first one that's smaller than the new add-a-leaf and stop there before removing it. There is a front/back direction to the leaves and it's obvious, as long as you remember to check and don't just slam it in there.



Stack em up and put the nut back on. Again no clamp required. You want it tight but not nuclear. There's no torque spec and it's only a 14mm nut - a strong guy could easily overtorque and shear it off.



But you do need the C Clamp for that middle wrap again.



And, ready to install or re-install:



(Also pasting this into the 'bjmoose installs OME' install instructions.)

 

That's used for carrier landings, right?

 

Bought my 2012 DCSB TRD Sport yesterday, bought an Extang Solid Fold tonneau today.

 

It's an ode to the Viking Crippler!

 

Claycrusher! Looks great.

 

I was thinking Meat Hook...

 

I would buy one too, live in Fort McMurray but travel to Vancouver Island once a year if your interested in a side job!!

 

Got the new truck on Saturday. Sunday put in Weathertechs in the front and back. Monday installed a Pop N Lock. On the way from Amazon are AVS window visors, Gorilla wheel lock, and a locking gas cap.

 

Maxtrac 4" spindles. Just need to drop my coilovers now and I'm good

 

Finally got rid of the vibration in my driveline. Made up some 1/8" aluminum spacers for the carrier bearing brackets and Walla!

 

post some pics ^

 

This with the aluminum spacer on the passenger side. Same on other side, such a simple mod to cure a huge headache.

 

This was all the last couple days but my photos weren't uploading, I got rid of that hideous plasti dip smoke I had on my tails and took the time to do it right with VHT night shades, went a little darker than I wanted by accident but I think it looks good. Also replaced my heads and fogs with super white plus bulbs, love em.

 

Did the alignment wasn't bad right side caster was a little high and toe was off a dad here's the finished product


After a test drive I confirmed what I thought would happen. I have a slight pull to the right need to get the that right side camber down some