What Have You Done To Your 2nd Gen Tacoma Today?

Sorry...does that plate say "Garden State"?

 

put some liver of sulfur just on the lettering...

 

Yeah, been hearing commercials on the radio about not running your defrost right off the bat for exactly this reason. Then there it is. Mutherf is right!

 

No chip there you didn't notice that expanded and caused the crack?

 

This ^. I go through lots of windshields and touch up paint here.. the windshield cracks always come from chips that spread when the defrost hits them. The "road sand" we use would be more accurately called "pea gravel"

 

I checked it out yesterday, didn't see any chips or nicks. If there was it must have been miniscule. Oh well new windshield coming my way

 

Ah okay, I didn't know he had a cap.That's a neat idea.

 

Finally got a light bar that I've wanted for so long
50" curved

 

Looks good! What brackets did you use?

 

I made them with the help of my bro

 

L-track tie down rails installed on the bed sides. Yesterday the rivet nuts arrived via UPS. The BakFlip Tonneau uses the factory tie down rails for bracket attachment. I needed an alternative tie down mechanism. The L-Track seems like the best alternative.

I have 2x 9-inch sections of L-Track left over, where to place??? By the tailgate, or at the cab side of the pickup box????

Tonneau picture shows the Gen2 with the Gen1 in the background. Plan is to keep both!

Modifications Completed (in 18 days since delivery)
Ultra-gauge
Cell Phone mount (pro.fit)
tail-gate hose clamp on hinge
Pop-N-Lock tailgate lock
4 additional bed D-Rings
Bed-mat with D-ring cutouts
Mini-D-rings on bed storage box bolts
BackFlip F1 Tonneau cover
L-track tie down rails

Modification Todo List:
Debadging the sides
Fog light Hi/Low mod
400W AC anytime mod
100V outlet in console
Better speakers/Amp with existing head unit

 

>> I have 2x 9-inch sections of L-Track left over, where to place???

Place them in a box and send them to me.

I've got a Roll-X and I'm in the same boat losing the stock track.
I gotta do this.

 

Today I installed a G1WH Dash Cam.

http://youtu.be/xSFu1H2GgKk

 

the question was more rhetorical. They will be used. Actually I am thinking about buying at least 2 more 12" sections so that I can mount one on each side vertically at the tailgate on the tail light enclosure, along with the existing 2x 9" sections vertically against the box at the cab side.

Once I started looking at possible options, it was hard to say stop.

 

cf wrapped one of the handles. prolly gonna derp the rest of the column too.

 

Why did you get one? Just something fun or do you have an insurance type reasoning behind it?

 

Part for fun, part for just in case. You never know. And it was super cheap @ $60 so not a huge dent in the wallet.

 

Began to wire my fuse box and switch backs from skygear

 

Where did you drill the hole? On the side, straight down, etc.

 

The corner. It was a pita getting the wires through but it took some time