4dr rock swatter....

Went and picked up a project that has a partially finished front end.... on trailer with some boxxer parts we headed back to shop...

03 quad cab
Toy rear with e-locker with solid opinion spacer
Rock assault 5" over front housing
5:29 gears
Detroit Locker front
Tundra 231mm front brakes with fror brackets
Skys manufacturing billet pitman arm
Trail gear 3" SAS
Creeper rear joints
Bilstein shocks
6 shooter knuckles,
Trunion bearing eliminator kit
Long field 30 spline
Long field outputs
Trail gear hydro assist
1650 pump
2x8" ram
Abs eliminator
Square tube front shaft
Dual cases
Hid headlights
Warn 9.5 CTI winch
Large capacity aluminum radiator so its above the frame rails
Electric fan
Tg bumper
All pro sliders
Raceline bead locks
MTR Kevlar 37" tires
ARP studs
Upgraded hub studs
Ifs box
Plated frame front and rear
High steer set up
Wilwood brake proportioning valve


Of the parts listed I'm down to finish.... this week
Hydro assist dual cases and trunion bearing eliminator this weekend

Front was almost finished so ripped into it Monday and between jobs got to this point....

 

Rolled ot out and did the radiator fan on a switch till Tuesday when I'm back at work...then I'll write up the sending unit and relay to a thermal switch.
Did a 40 mile drive to run it and see how it handles....all good 80 down the freeway steady and controlled....
Will be doing wheel spacers in rear...its 5" over in front....

 

Built a rack, not finished yet still dimple die plates and attachments to go on as tie downs

 

Sweet build so far man! Where'd you find that giant clamp for the Co2 tank mount? Looks like it works really well!

 

Got a good test run in....
Here's a video of me dropping a ledge

http://www.pinkbike.com/video/394487/









Then 2 different bus dies Vlad and rowel both in white XJ'S flopped same spot and matching dents on side and roof...

 

Well 3 days with hydro assist and figured out where I'm getting air in system....
The trail gear ram is leaking on the shaft at seals....3 days old and its puddling a little here and there...explains then constant need to burp because of air causing pump wine...

Yes my ram is horizontal with tie rod there's no side loading...

It felt like stock just a smidge better but still having turn issues...noticed it would feel great then like crap..
So I'll call trail gear tomorrow and get a replacement ram....ehhhhh shit happens not everything cant be perfect therefore there's warranty...lol
So no love lost at this moment....

 

nice truck! Good luck on the trail mart stuff!

 

Yeah it cant be all bad...

 

Sub'd. Looking great so far

 

Have so e good pkcs from KOH...we ran. Chocolate thunder and a few others....truck did good...

 

Bobbed 13" off the bed today...still need to do finish work.

 

Looks good!

 

Thanks....

 

Bad Ass look'n rig!

 

Damn dude looks sick!

 

Agreed!

 

I have an 03 dblcab.
Im living through you right now!!! Lets see pics of your truck running johnson valley. I dont know if Ill ever get down there so you gotta help a brother out!!

 

Trying to get the 2 guys info from camp that snapped pics and rode along...as well as there were several people.e at the peanut gallery taking videos and pictures I know for fact some will pop up....
Usually i get pics but this trip was adrenaline and hammering down...we will be at coral canyon Monday and I'll have some from there then TDS which isn't bad then back to hammers...
Cant link video of buddy flopping on his lid at backdoor....he rolled hid buggy back over and nailed it.

I will dig up some...there were enough cameras....I know someone got the made up line at highway 19 in johnson valley as well....

 

Subd

 

Let's hear it for bobbed beds lol...was dragging shackles in the dirt and rocks today.
This ledge is NASTY...pics don't do it justce the left side is a wall and there is a gap ion rocks....i made it but have been denied a few times in the past on this as well as this spot claims axles....and yes left side is sitting non the wall.