tranny mount and or tcase mount 3.4 auto dual cases

Best tranny mount for 3.4 auto and a tcase mount.

I hard mounted motor and the tcase is slapping and bouncing around...the center rubber part on tranny mount is done...sides are good...may e just replace the center with poly

 

You are going to need to hard mount the tcase as well. If not you will start breaking the trans or tcase housings which would suck. Did you solid mount the motor mounts or just use stiffer poly mounts? If its the latter you can get one of the poly tcase mounts from marlin, or 4xinnovations and use that. As for a crossmember, i think the TG one looks good. I am using the 4xinnovations mount with the stock crossmember but I'm still IFS.

 

I have the trail gear crossmember....I'd like to mount the tcase off of 8t...yeah motor is poly....4x inovations and the other are for manual transmissions not auto

 

Really?!?! Thats crazy that they only work with a manual. Build your own i guess, or install a crawler and mount to that.

 

The marlin mounts will work when I do the dual cases...the case going in is gear driven first....so I can make that mount work there...still have to address transmission

 

You should be ok just mounting it off the crawler.

 

Slander,
Any pics of your 4Xinnovations mount?
I too only have the trans mounted to the OEM cross member.

Thanks.

 

If you want a more solid mount for rear of drive train go poly mounts for tranny...I just did mine and what a difference...been out crawling , jumping and hauling @$$ it has no secondary movement from motor or tranny...both poly mounted....

I'll be doing the 4x innovations with addition of second case....