in South east who can do dash cluster mod?

yeah well... you got me

 

Haha just messing...sick truck btw

 

is this a good way to go about it?

http://www.xr-underground.com/forum/showthread.php?t=941

 

...thanks im a frequent visitor to your build thread as well

 

No shit. Someone already did.

 

I didn't pull my dash apart that much man. Its pretty simple to do the led swap tho. The leds for the dash aren't that small, u should c the ones for the stereo. Those r the ones that r SMALL.

Here is a pic of mine.

 

Yes that's a very good write up. I would recommend after every led change go test it. If you don't you will be chasing your tail trying to find where you went wrong. Also order extra LEDs. AND just like in the write up pay attention to where the notches are in the LEDs and make sure they go the same way. I would recommend a fine tip soldering kit. NOT a soldering gun.

You do not need to put it all back together to test it, just take the board out and plug it in and turn the key. If it lights up move to the next led.

I said order extra because you will melt some of those lil LEDs. Use a pare of tweezers not your fingers. Good luck

 

dont tell me it was the short one...but nah idc but i do wana have mine done

 

thats sweet. if i new how to do much of anything useful to people i would. but i don’t know much yet. i have to fix my temp maybe tomorrow.

and yeah i want to do the light by the auto shifter. i did take the little condom off the light and it looks a little better..

 

Yup.

Your gonna be second then lol. What colors you want son?

 

of course it possible that's mine in the picture

 

That n the little "notch" on each LED there's a white dot indicating how it's suppose to be laid down n soldered

As for going to check every light...I just check it with an digital volt/ohm meter or go check them by sections becuz the lights work in 4 different sections (background)

 

So I've seen I've seen your name on the bottom corner under viewers lol

 

That's good info. (the 4 sections part)

Creepy

 

Yup...ones the rpms, speedo, gas/temp n odometer...if one section is out all you gotta do is toubleshoot those 2-3 lights...if u know your way with a meter it will light them up individually n the one that doesn't light up is the bad one

 

figures. damn that guy always callin dibs

umm..probally blue and white..

 

Yup!

 

You should do white with pink needles...

 

hmm...tempting

 

I like the blue/white mix. What is yours Jerez?