Need deckplate help.

Lke the title says I need some help with making the deckplate hole in/around san diego.
So does anyone have a 3inch holesaw I can borrow or come by and use?
Also if anyone knows of a good muffler shop that fabs up motorcycle exhuast let me know.

 

You can do it with a jig saw or rotozip. We install 100's of them on kayaks and such every year, nothing different about this.

 

I have a jig saw ,any blade you reccomend? Don't know what a rotozip is.
Is there a marine shop you know of that sells 3inch deckplates?

 

Rotozip is a router. Any jigsaw blade should cut.

3" DP no, 4" I stock. if that fits ill pop one on the box for you for 20.00 total, just have to bring air box to my work.

A 4" plate is 6" over all OD. Never seen much for 3", you could try SD Marine Exchange, theyd be my best bet.

 

Okay cool ,will check that shop out.
Think I will cut out the box with my jigsaw if not I will pm you.

 

I cut mine with a Dremel and a drill bit. I tried a jigsaw but it bounced around a lot trying to make the cut.

 

Picked up extra i4 stock intake parts for a 1st gen. Has the airbox, hose that connects to tb and a pretty clean k&n filter.Someone left on the curb and posted on cl. Going to cut into this box 1st.

 

Ignore

 

I did mine with a drill and a keyhole saw. Cost me about 0 dollars as i havent put on the deckplate yet