Tacoma World Forums

Tacoma World Forums (http://www.tacomaworld.com/forum/)
-   Street Trucks (http://www.tacomaworld.com/forum/street-trucks/)
-   -   Another 5/6 drop w/notch & 17" BBS wheels (http://www.tacomaworld.com/forum/street-trucks/269039-another-5-6-drop-w-notch-17-bbs-wheels.html)

Beefed Taco 03-19-2013 05:54 PM

Another 5/6 drop w/notch & 17" BBS wheels
 
4 Attachment(s)
I had this truck in the shop a few days ago. It already had Streetacos' Taco Lean blocks in back, a 4-1/4" on the right and a 3-3/4" on the left, so I chopped up the tall block on the right (the 4-1/4") and turned it into a 3-1/4" for the left side, and used the 3-3/4" for the right.

I pulled a leaf from the 5 lug pack and used a Streetacos weld in c-notch kit that includes bump stops. I also trimmed the bed brace above the diff, and did a liner & brace removal above the rear tires as well as perform my normal fender lip trip to clear his 225/45/17's on 17x7.5 +40 BBS wheels and allow them to tuck.

It rides better than before, a bit more firm, with no rubbing or bottoming out issues like it had when it arrived. http://www.CustomTacos.com/forum/ima...ew/waytogo.gif

The front has Belltech 2" coils and a ball joint flip. I chose to leave it because I thought it looked proportionate, but when he took it home he cut the coils for more drop. He'll probably post some pics of it's new stance when he sees this thread.

Az lowtacoma 03-19-2013 09:41 PM

I need to bring my truck out there so I can get it to 5/6

Beefed Taco 03-22-2013 12:00 PM

Quote:

Originally Posted by Az lowtacoma (Post 6615751)
I need to bring my truck out there so I can get it to 5/6

haha, thanks for looking Seth.

coma98 05-06-2013 08:06 PM

Dam good looking truck beefed! I love seein ur work. I miss my truck being that color.

mdh313 11-08-2014 10:10 PM

Do you ever experience negative camber problems after flipping the ball joints? Or any other alignment problems?


All times are GMT -7. The time now is 12:28 AM.