1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

quote... 250 for bilstein fronts to be installed.

Discussion in 'Suspension' started by Elliebarley1978, Jun 30, 2010.

  1. Jun 30, 2010 at 3:19 PM
    #1
    Elliebarley1978

    Elliebarley1978 [OP] Well-Known Member

    Joined:
    Sep 16, 2009
    Member:
    #22873
    Messages:
    276
    Gender:
    Male
    canada
    weathertech floor liners, wet okole fronts, leer 100xq cap, trd exhaust
    i phoned around to get front and back adjustable 5100 bilsteins and 4 wheel parts quoted me at 250 for the fronts to install. 24 for the back. is this right?

    is this price right?
    is that the going rate?

    why is it so damn expensive?
     
  2. Jun 30, 2010 at 3:21 PM
    #2
    outlawtacoma

    outlawtacoma Well-Known Member

    Joined:
    Sep 25, 2007
    Member:
    #2796
    Messages:
    3,323
    Gender:
    Male
    W. TN
    Vehicle:
    2018 T4RTRDOR
    if you love your truck, please do not let those guys do anything to it!!!!
    Its not a hard job to do yourself man. just be careful when compressing the springs.
     
  3. Jun 30, 2010 at 3:24 PM
    #3
    Elliebarley1978

    Elliebarley1978 [OP] Well-Known Member

    Joined:
    Sep 16, 2009
    Member:
    #22873
    Messages:
    276
    Gender:
    Male
    canada
    weathertech floor liners, wet okole fronts, leer 100xq cap, trd exhaust
    thanks ill start looking for the how to link.
     
  4. Jun 30, 2010 at 3:26 PM
    #4
    Brunes

    Brunes abides.

    Joined:
    May 31, 2008
    Member:
    #7011
    Messages:
    17,562
    Gender:
    Male
    First Name:
    Rotorhead
    Around
    Vehicle:
    08 Red/Graphite and Satin Black
    Inside: Tint, Wet Okole 1/2 Piped Red/Black Covers, Black Weathertech Digital Fit Mats, URD Short Throw w/ TWM Weighted Knob, USA Spec iPod adapter. Outside: 4300K Retro w/ Angel Eyes and Red Shrouds, 5000K Blazer Fog Light Retrofit, Debadge, Bed Locking Handle, Satin Black Rims Performance: TRD/Steigmeier Blower w/ 2.7 Pulley. 668 Injectors and 320 LPH AEM Fuel pump. URD UCON and 7th Injector. DTLT Headers, URD Y-Pipe, Wicked Flow Muffler. Suspension: Both: OME Shocks Front: 886X's and TC UCAs Rear: Dakars Armor: Relentless Front Bumper Relentless High Clearance Rear w/ Tire/Rotopax Swing Out Relentless Front, Mid, and TCase skids BAMF Diff Skid Recovery and Spares: Fullsize Spare Tire 2x2 gal Rotopax 1x1 gal Rotopax 1x1 gal Water Rotopax Warn 9.5XP-S Winch Hi-Lift Extreme 60" Ironman Off-Road Recovery Kit
    If it's 240 for the back that's horrible. If it's 24-That's not too bad. Rear shocks are EASY.

    The fronts are not that hard to do...Just gotta have access to the right tools. But if you figure 80-90 bucks an hour plus all the BS fees and taxes and stuff....250 is probably about right. 3 hours total to pull the fronts, break them down, build up the new struts with the 5100s, replace, retorque, align and clean up...Probably could be done faster- but they won't quote you a lower price...
     
  5. Jun 30, 2010 at 3:26 PM
    #5
    RPain

    RPain Well-Known Member

    Joined:
    Jul 12, 2009
    Member:
    #19596
    Messages:
    2,200
    Gender:
    Male
    First Name:
    Ryan
    Chandler, Arizona
    Vehicle:
    2016 Tacoma DCSB 4x4 TRD Sport
    Link to build in sig
    i paid 200 for my fronts to be installed, plus 70 for the alignment
     
  6. Jun 30, 2010 at 4:58 PM
    #6
    gtrotter

    gtrotter Well-Known Member

    Joined:
    Mar 1, 2010
    Member:
    #32351
    Messages:
    396
    Gender:
    Male
    Interlake, Indiana
    Vehicle:
    2009 Regular cab 4x4, ARB's, 4.88's, bumpers, 2017 DCSB SR5 stock,2008 Reg. Cab 4x4
    locker,mud tires, lifted, toolbox
    Unless you have done compressed springs before and/or have the right tools for it, then let a shop swap the springs. You can always take the coil strut assemblies off of the truck and have someone take you to a shop to swap them over. 60 bucks maybe for that, and well worth it if you value your teeth.

    Personally, I do all my own work on my truck. Springs can be very dangerous if you don't know what you are doing and aren't careful. All of the energy can come out and hurt someone or anything else nearby. If you eventually go to a stiffer spring, then be careful as well. My OME 885 springs were bending the bolts on the springs compressors. Yeah, that was a little scary.
     
  7. Jun 30, 2010 at 11:02 PM
    #7
    outlawtacoma

    outlawtacoma Well-Known Member

    Joined:
    Sep 25, 2007
    Member:
    #2796
    Messages:
    3,323
    Gender:
    Male
    W. TN
    Vehicle:
    2018 T4RTRDOR
    I agree with gtrotter. take them off yourself, but if you are not comfortable doing it yourself, then take it to a shop to have them set them in the assembly for you. Compressing springs can be deadly, so be careful, if you decide to do it yourself.
     
  8. Jun 30, 2010 at 11:07 PM
    #8
    krimson

    krimson Nothin

    Joined:
    May 17, 2008
    Member:
    #6714
    Messages:
    3,401
    Vehicle:
    TRD Off Road
    OME 3" lift with 885 coils. OME Shocks with TSB 1.5 AAL. 285/75/16 KM2s. XD Hoss 16" wheels. DDM Tuning 6000K HIDs, H10 6000K Fogs. BHLM. Debaged. 20% tint on front windows.
    All you need is a coil compressor a jack and a case of beer
     

Products Discussed in

To Top