This question is for anyone who has the Toytec AAL 1.5" installed. I have a 2010 DC/LB and my present set up is Bilsteins on all 4 corners with Eibach coils in the front.
My front Bilsteins are set at zero. This causes my truck to be a .5" nose high in the front. Which is not bad until I add weight to the bed. This measurement is from frame to floor in behind front wheel and infront of the rear wheel. 14.5" infront, 14.00" in rear. So with a full tank of gas and a load in the bed I get a little more nose high as you can imagine.
My thoughts are by adding the 1.5 AAL in the rear, I should end up with a 1" rear lift. Does this sound about right? I also am wondering if this will look right or will it look like the rear is too high?
I appreciate the help...