My post 5100 install

Okay so i just got my 5100s put on and had the alignment afterwards. I wasnt there to talk to the guy but I did get his Algnmnet Report. Whats the good, bad and ugly?


Front:
L caster=.8
R caster=.4
L camber=1.6 (he said I need a part to fix this?)
R camber=.5

Rear:
L camber= -.1
R camber= -.2

Thrust angle= -.2
Toe Fronts= .05 and .05
Toe Backs- .2 and -.1
Total Toe=.1

What do you guys think? this means next to nothing for me.

 

What height did you set them at? If it's 2.5, you may need UCA's (upper control arms) to get the alignment right. Figure on $500 or more for those.

 

$489 for some built right's at the Truck Shop. Look up Tricoma

 

After getting my alignment done 3 times these were my results after I told them the specs should be.

 

I had them set at 1.75". so it looks like my only real red flag is the Left Camber at 1.6 from what I can tell. Is this critical and would another alignment even do anything?