My chosen lift, couple questions...

i've finally decided on a lift for my 2010 tacoma trd sport access cab 4x4.

5100's front and rear
ome 885 coils (shocks set on 0) with the top spacer
diff drop kit
rear 2" aal
extended brake lines
u- bolts

is there anything else i would need???

and

do i need to get the axle shims for the rear? or could i get them later if needed?

any input is greatly appreciated guys thanks in advance

 

Sounds good to me. I would try it out with no shims then add them if necessary. I personally would do the same with the diff drop since they don't really do much. You may be fine not running it.

 

ok, i'll try it without them and see how it goes thanks

 

wow only one response.....is everyone sleeping or something?

 

Not me! How much lift you gonna get up front? And yea I would wait and see if you have vibes before the cb drop and/or axle shims

 

i'm going with the 5100's set at zero with the 885 coils and the top plate, so around 3 inches i guess