I am upgrading my stock spindles and UCA to Camburg spindles with Camburg UCA Uniball set up - with the stainless steel extended break lines for a mid travel set up - light off road and fire roads. Plus I heard it will ride a lot smoother.
I already have 5100's all the way around. I want to make sure my front end does not sit high with the spindle lift and I want to be as level as possible.
I was planning to dropping my front 5100's from 2.5 to "0" after the spindle install. The rear is a TSB with a 1" block - for now.
Will this set up be level or will I ride high in the front?
Any suggestions or comments would be greatly appreciated.