35's and 3 inch lift on 2nd Gen.?

Have you had the cab mount chopped?

 

Yup, I'm going to probably grind it back just a little farther though.

 

Nope, just on the bottom. I still have a couple inches up top.

 

Kevin how do you manage at pismo, on my ome setup ever time it hit the bumps the tire stuffed itself into the top of the firewall. Does it do that with the 35s as well?

 

Nope, on jumps it hits the side of the fender first.

 

haha I see, no jumping for you. but still idk what the LT guys to so they dont rub the top.

 

Fiberglass, and strapped/ hydrolic bump stops I'm guessing. I'm sure they limit the travel to just the amount they need before it would hit the fenders.

 

Where the pinch weld is? I'm not positive what you are talking about, but it wasn't touching anything besides the cab mount when I looked.

 

I don't hit there because I can't stuff as far as you.

 

I know you said you didn't want to go with fiberglass fenders but I thought I would share this anyway.
Not 35s but no lift either.

 

not bad^

 

I'm betting the front shot looks pretty terrible though. Glass without long travel looks bad 99% of the time.

 

welcome to the party

 

Eric, I got foglights for my bumper today and they don't really fit very well. I'll have you take a look at it when you guys are down here next week.

 

that's what I was thinking but I imagine if you got the right offset on your wheels it MIGHT work but I dunno

 

Haha thanks

Alright. Those tabs were just kind of a quickie thing at the time, the bumpers now have a lot of adjustment out of a new light mounting tab design.

 

Hook it up! Mine are all jacked.

 

but nothing for the rear which is dumb. I would be so on top of that. I have my fenders begging to come off.

 

You have fender clearance problems?