anyone install 5100's and have 0 issues?

Seems like from what I hear so many people have issues with this install. I'm looking to get 5100's all around at 2.5" with toytec 2" AAL's in the rear. Just wondering if anyone has done this install and worked out without issues.

 

<This guy

http://www.tacomaworld.com/forum/suspension/104199-my-5100-install.html#post1998313

 

0 problems here.
Oh there is 1 thing, it now handles very well in the corners, doesn't nose dive when stoping hard and handles ruff roads with out dancing all over the place.

 

^X2

 

me

 

I had no issues when running them with factory coils...rode much better. But stiffer coils, now thats another ballgame

 

no problems with mine and I added heavier springs

 

Glad to hear some people are having good results. Hoping to have the same. Truck is an 08 with only 17k on it

 

What are all the issues you are hearing with the install? It was pretty straight forward.

 

i dont call my lean a problem

 

I didn't have any issues other than installing the spring perches upside down the first time.

 

so dont do heavy coils? just 5100's? im looking to fit 285's on stock rims. And this guy all 4 5100's $282.99 shipped , 888-973-6967

 

No real problems, other than me being dumb and forgetting to install the driver-side spacer the first time around. Had to take that one off and do it again but the install itself was very smooth, even without a helper. Then, a week later I decided I didn't like the setting I had on the front so I did it all over again.

http://www.tacomaworld.com/forum/suspension/31862-how-front-shock-spring-removal.html

New pics on page 8 of that post. Just follow the steps Chris posted and reference those pics... easy.

 

Pretty straight forward, make sure you have a good spring compressor, & know all the precautions I had no issues

 

Not one problem.

 

installed all 4 w/ the fronts at 2.5" w/o any issues. never had any sort of vibes, trouble w/ alignment, etc either...

 

Just issues with vibes, possible diff problems etc. the install looks pretty straightforward so me and my buddy are probably gonna do it when i get the parts.