New PIC SAWS/ TC

Looks good how bout A pic of the whole truck!

 

Looking good! Did you leave the sway bar on? Only reason I ask is because I have the Camburgs 2.5 coilovers and the sway bar would rub on my coils causing a squeak everytime i turned.

 

Lucky!!!!!!

 

Get a sway bar relocate. Takes 30 min to put on.

 

Take the swaybar OFF, takes all of 15 minutes...

 

Yes I left it on with swaybar relocate but I believe on hard bumps and turning at the same time they have rubbed ?

 

ALSO I would never run at highway speeds without sway bar does more than what most people talk about on here.

 

Don't put yourself in a situation where other drivers can cause you problems, and it's no issue. (i.e. following too closely)

Animals get hit.

 

The roads around here are pretty bad this thing could get loose real easy.

 

I still doubt it would be a problem with VSC/TRAC on duty. But, your call.

 

OP..not trying to persuade you to go either direction with the sway bar. But jsut remember that the new coils are stiffer than the stock ones. Helps reduce some of the body roll if you do decide to take it off.

 

Mine still rubbed with the sway bar relocate brackets, I would probably still have it on but the squeaking was driving me crazy