Can I use this aal from toytec?

I have a rear tsb done with 1 1/2 inch block right now. Want to lift it more. Will adding the toytec 1 1/2 aal for tsb work with the block still? So tsb, aal toytec, and block = 3.5 inch lift for the rear.

 

yes it will work but it will ride terrible and might give you vibrations.

 

It will work but you'll need longer shocks. I think you'll also need extended brake lines.

 

take the block out and get a 2" aal

 

Just take the block out and put the AAL in.

I'm running TSB springs plus 1.5" wheeler's AAL and it's a-ok.

 

x3

 

If I take the block out and do aal then the back would be about a 2 inch lift with my tsb. I'm trying to get a 3-4 inch lift to match the spindles and billys at .85 setting.

If I do allpro pack I would still have to get 1 inch block. But with this it will cost me 400-450. Aal from toytec for tsb and using my original parts would be less then 100.

 

with the block out and a tsb pack and a 2" aal you will be right at 3 "

 

Woulda put me at about 3.5" (I got 1.5" out of my TSB springs), but I understand most people settle to more around an inch difference.

 

was that a fat joke

 

Wouldn't stack lifts in front or back, call me crazy........I won't deny it