Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

HELP! Dimensions for blocks

Reply
 
Thread Tools Search this Thread
Old 05-05-2011, 06:23 PM   #1
durf4694 [OP] durf4694 is offline
giggity giggity
durf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the shed
 
durf4694's Avatar
Joined: Oct 2010, #44226
Location: ny
Gender: Male
Posts: 124
durf4694's Tacoma Gallery
HELP! Dimensions for blocks

Im looking to make some 1.5 lift blocks and i was wondering if anyone could tell me the size of the pin on top of the block (diameter and height) and the hole on the bottom of the block. i'd really appreciate it thank you!!
  Reply With Quote
Old 05-05-2011, 06:26 PM   #2
...
G scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shed
Name: Garrett
Joined: Jan 2011, #49443
Location: Mesa
Age: 26
Gender: Male
Posts: 5,004
G scott04's Tacoma Gallery
You'd be happier and time and aggravation ahead if you
went aal... you can get em for like 70 bucks I believe
  Reply With Quote
Old 05-05-2011, 06:35 PM   #3
durf4694 [OP] durf4694 is offline
giggity giggity
durf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the shed
 
durf4694's Avatar
Joined: Oct 2010, #44226
Location: ny
Gender: Male
Posts: 124
durf4694's Tacoma Gallery
yea i did my research and im not a wheeler so the block should suit my application just fine. thanks for the advice though!!
  Reply With Quote
Old 05-05-2011, 06:39 PM   #4
...
G scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shedG scott04 is one of the sharper tools in the shed
Name: Garrett
Joined: Jan 2011, #49443
Location: Mesa
Age: 26
Gender: Male
Posts: 5,004
G scott04's Tacoma Gallery
Quote:
Originally Posted by durf4694 View Post
yea i did my research and im not a wheeler so the block should suit my application just fine. thanks for the advice though!!
Alrighty then sounds good! sorry cant help ya withe dimensions though...
  Reply With Quote
Old 05-10-2011, 07:42 PM   #6
Senior Member
brelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud of
Air Force:
Name: Terry
Joined: Jul 2009, #19979
Location: Dublin, CA
Gender: Male
Posts: 460
brelandt's Tacoma Gallery
hell I have a set of 3.5" blocks in the garage...but the garage is 56 miles away! Sorry....

P.S. if blocks is what you want then don't let anyone tell you otherwise. It's your truck after all. I had those 3.5" for 3 years with no issues. Even took it off roading in Arkansas back when I use to take it off roading and they worked great even with holding 4 wheelers in the bed!

hope it works out!
  Reply With Quote
Old 05-10-2011, 08:05 PM   #7
KPT KPT is offline
sees what you did there.
KPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shedKPT is one of the sharper tools in the shed
 
KPT's Avatar
Joined: Sep 2009, #22227
Gender: Male
Posts: 32,404
KPT's Tacoma Gallery
I'd be more worried about axle wrap on road, than anything offroad.
  Reply With Quote
Old 05-10-2011, 08:36 PM   #8
Senior Member
brelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud ofbrelandt has much to be proud of
Air Force:
Name: Terry
Joined: Jul 2009, #19979
Location: Dublin, CA
Gender: Male
Posts: 460
brelandt's Tacoma Gallery
On the thin leaf taco springs it was there, but it wasn't terrible. Didn't have any issues. Might have just been me???? I don't know? But early Rangers came with them stock and there are even heavy trucks, like buses and dump trucks running blocks on the front leaf and in fact they have been used for years. Just give it a try and if they do not perform the way you like then move on to something else.
  Reply With Quote
Old 05-12-2011, 06:08 PM   #9
durf4694 [OP] durf4694 is offline
giggity giggity
durf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the shed
 
durf4694's Avatar
Joined: Oct 2010, #44226
Location: ny
Gender: Male
Posts: 124
durf4694's Tacoma Gallery
Quote:
Originally Posted by PSU Taco85 View Post
The bolt that goes through the leaf has a diameter 3/8". The head of the bolt that rests in the spring perch is 9/16". I've never measured the hole in the spring perch, but I would imagine a little bigger than 9/16" so that there is a little room for error and shimmying the leaf into place.



thank you !!!!!!!!!!!!! took me fricken forever to get them . time to make some chips!
  Reply With Quote
Old 05-15-2011, 10:00 AM   #10
durf4694 [OP] durf4694 is offline
giggity giggity
durf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the sheddurf4694 is one of the sharper tools in the shed
 
durf4694's Avatar
Joined: Oct 2010, #44226
Location: ny
Gender: Male
Posts: 124
durf4694's Tacoma Gallery
Quote:
Originally Posted by PSU Taco85 View Post
No problem man, I had to measure my centering pin when I added axle shims after my lift install, that's the only reason I know the dimensions LOL

why did you have to measure your centering pin when you put the shims in ? im guessing b/c they sat under the whole entire block
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
TOYOTA dimensions Blackdawg 1st Gen. Tacomas 1 09-23-2011 12:43 AM
Dimensions of spacers Foster9091 1st Gen. Tacomas 0 09-28-2009 11:44 AM
Tray Dimensions... Soon 1st Gen. Tacomas 6 08-18-2009 06:29 AM
Diff in lowering blocks and lifting blocks? jeff6001 1st Gen. Tacomas 12 05-18-2009 07:22 PM
Speaker dimensions Lentsnh Audio & Video 2 03-14-2009 05:50 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.