Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

Need help with alignment specs

Reply
 
Thread Tools Search this Thread
Old 05-07-2011, 01:49 PM   #1
Taco76087 [OP] Taco76087 is offline
Senior Member
Taco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shedTaco76087 is one of the sharper tools in the shed
 
Taco76087's Avatar
Name: Robert
Joined: Jan 2010, #29458
Location: Weatherford,Texas
Gender: Male
Posts: 4,043
Taco76087's Tacoma Gallery
Need help with alignment specs

I just had an alignment when I had my Bilstein's set at 2.5'' and it was great, Alignment specs were with 2.5'' lift in from and 3'' in back.

Camber: 0.1 0.1
Caster: 2.0 2.0
Toe: 0.5 0.5

Would these still be good with the kings I installed? I left them as they came from DSMS, but the alignment seems off, what specs should I align to this time? Same as above or are there better numbers to aim for?

Any help is appreciated
  Reply With Quote
Old 05-07-2011, 08:34 PM   #3
With sufficient thrust, pigs fly just fine.
chris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shedchris4x4 is one of the sharper tools in the shed
 
chris4x4's Avatar
Name: FlimFlubberJAM
Joined: May 2008, #6497
Location: Tenoe, AZ
Gender: Male
Posts: 96,874
chris4x4's Tacoma Gallery
Toe = .05*
Camber = .1*
Caster = 2.0* or more
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
what should my alignment specs. be? mixaro 1st Gen. Tacomas 14 05-28-2012 05:24 PM
Do these alignment specs look OK? Taco-NB Suspension 26 08-04-2011 06:36 AM
alignment specs rogerkamp8817 2nd Gen. Tacomas 5 04-28-2010 08:07 PM
Alignment Specs Off dysfunctnlretard Suspension 15 09-29-2009 04:11 PM
alignment specs? RDAY Suspension 2 06-12-2009 03:38 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.