Already have good lift kit...

My questions are
Can you run a 3in lift and a 2in body lift? What are the side effects? Anyone else running this Thanks in advance

I already have the 3 inch suspension, as follows:

front coil overs OME nitro chargers
Total chaos uniball UCAs
extended stainless steel braided brake lines from wheelers front/rear
rear dakar OME leaf springs with extended travel nitro charged OME shocks
all pro u bolt flip kit with timbren bump stops
285/75/16 bfg at ko tires
spidertrax wheel spacers for the front

 

You could... But I wouldn't do it.. Why not just run with that setup and skip the body lift idea? Iam pretty much running the same as you and no complaints with my 285s.

 

Im still rubbing on the back side. I already trimmed the front. Im not lookin to get to aggresive with the body lift. I was thinking 1 or 1.5 inch im also running 285s

 

You are rubbing on the cab mounts? If so, check out the cab mount chop mod. Tons of people that run 285s do it and have close to no rubbing while wheeling.

 

sounds to me like you have to do a bit more trimming. Are you rubbing on the frame? because a body lift won't help you, look into a cab mount chop and cut some more wheel well. pics? where you are rubbing

 

i did the cab mount chop and have no rubbing on 285s while wheeling as well

 

I will def check into that. Thanks for the info. I drive DOWN a washed out dirt road every day. Thats when im hitting thanks again

 

Does the cab mount still give enough clearance in the same circumstances /|\ with a heavy plate bumper. I plan on installing one soon

 

Yeah it should, what OME coils are you running? With a plate bumper, it's a good idea to run the 886s.

 

885s now

 

Get the 886s like I said if you gonna run a new bumper. Then you will be good to go

 

awesome. easy enough b/s/t section here i come Thanks for the info man. I'll look in to the cap mount chop too
sent some rep your way

 

No problem! Thanks for your service Marine!

 

Oorah!!