What do you think of this setup?

In the front: Set at 2.5" Springs: The Back:

 

the spring you wont need if your going with that coilover kit. and the rear shocks you'll need but also an add a leaf or blocks.

hope this helps

 

that helps a lot, ill save the $180 and whats better, blocks or leafs? i wanted to keep the back stock for the pre runner lean

 

if you want the lean you wont need anything. im not a fan of the "bro" lean but its your choice. an AAL would be better and a new leaf pack is the best option but not chaep. i think an aal is under $100.

 

will the shocks in the back help the ride? cause i plan to do some off roading but not to much, just coil overs that can take braking bumps but im not going over 4' whoops or anything crazy, just pot holes and bumps

 

on a first gen id say yes since they wear out over time but for a second gen im not sure. i think it would, hopefully a second genner will chime in...

 

Yeah so the shocks wouldn't lift the back, thats why I need the AAL?

 

No, shocks do not add lift. An add a leaf/blocks/shackles are needed to lift the rear. You need new extended length shocks when you lift the rear.

 

Oh ok, well if I replace them will they help the ride in the rear?

 

Yep, if you're not going to lift the rear aftermarket stock length shocks will work

 

If I get longer shocks do I have to cut the bed and run it through?

 

You won't have to cut through the bed to run longer shocks unless you go with some sort of long travel setup.

 

Alright that helps, any shocks you Reccomend? That aren't to pricy for the back

 

A lot of people run the bilstein 5100s and really like them. I'm running the 5100s with my new leaf pack and I really like them. You should try calling the guys at Toytec or Down South Motorsports and talk to them about what shocks to run in the rear so you can get the right length shocks.

 

Actually will work. It says it works with 0-3" of lift so if you decide to lift the rear in the future these shocks will work too.

 

Yeah I'll give them a call, I really like toytec so I'll ask them

 

Sounds good. I ordered my lift from them and they had great customer service, I'll definitely buy from them again

 

Your on the right track bud...those adjustable coil overs and 5100s would be great up front and then a 1.5" AAL for the rear and some rear 5100s as well...remember that if you go higher than 2.5", new UCAs are recommended for alignment purposes

 

Yeah I'm staying at 2.5 cause of that reason, but once I get money I'll get the UCAs, this helps a lot