LSC15's 95 Tacoma 4x4

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

quick suspension help on ubolts

Reply
 
Thread Tools Search this Thread Display Modes
Old 06-20-2011, 06:51 PM   #1
Senior Member
Hunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shed
Firefighter: Probie
Joined: Dec 2010, #47031
Location: E-Town Ky
Age: 25
Gender: Male
Posts: 2,550
Hunter500ky's Tacoma Gallery
quick suspension help on ubolts

Ok guys need a quick answer rain is coming lol



I toasted my old u bolts that were longer then the stock ones, forgot to get some today but I have everything almost done.


My factory ubolts fit BUT there is hardly any thread on it (this is without torquing down to 75lbs).

Will it work or should I wait till tomorrow and do it in the rain?


If need be I can wait I am not in a crazy rush to do it, just didnt know if these will work or not.


Thanks!
  Reply With Quote
Old 06-20-2011, 06:54 PM   #2
When you blow off steam you get an eyepatch
YFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shedYFZ450MOE is one of the sharper tools in the shed
 
YFZ450MOE's Avatar
Coast Guard: Machinery Technician
Name: Moe
Joined: Feb 2011, #51261
Location: Auburn, WA / Roseburg, OR
Gender: Dude
Posts: 1,252
YFZ450MOE's Tacoma Gallery
Its not going to hurt to try it, unless there is just barely enough thread showing that you strip it out. I'd be carefully of that, but if you can get a few turns on it with your fingers then hit it up with a ratchet you should be alright!
  Reply With Quote
Old 06-20-2011, 06:55 PM   #3
Senior Member
Hunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shed
Firefighter: Probie
Joined: Dec 2010, #47031
Location: E-Town Ky
Age: 25
Gender: Male
Posts: 2,550
Hunter500ky's Tacoma Gallery
Yeah no I have them on finger tight.

I was just making sure I dont need x amount of thread showing ya know?


Im sure once I start to tighten it down I will obviously get more thread.


They wont be on about a month Im getting shims and will need longer ubolts


Just dont want to be driving and my axle wants to leave the truck haha



so it should be ok?
  Reply With Quote
Old 06-20-2011, 07:01 PM   #5
Senior Member
Hunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shed
Firefighter: Probie
Joined: Dec 2010, #47031
Location: E-Town Ky
Age: 25
Gender: Male
Posts: 2,550
Hunter500ky's Tacoma Gallery
Thanks F it Im running with it, If I feel its unsafe Ill just redo it for the 5th time
  Reply With Quote
Old 06-20-2011, 08:13 PM   #6
Senior Member
Hunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shedHunter500ky is one of the sharper tools in the shed
Firefighter: Probie
Joined: Dec 2010, #47031
Location: E-Town Ky
Age: 25
Gender: Male
Posts: 2,550
Hunter500ky's Tacoma Gallery
Ok guys it's on it looks good. Still a problem, I did this because it looked like my axle was crooked, it still looks that way can someone post a pic from under neath the truck looking at the axle?
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
quick question about suspension MedlinAround 2nd Gen. Tacomas 6 03-25-2011 08:54 AM
Looking for some quick advice on suspension overhaul 96er Suspension 1 08-30-2010 12:14 PM
UBolts dgr540 Suspension 5 07-12-2010 05:06 PM
Quick question front suspension nascarracing Suspension 13 06-09-2010 06:16 PM
05+ rear suspension hardware (ubolts), d-cab door handles, etc justinh Buy / Sell / Trade 4 03-19-2010 12:35 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.