1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Pro Comp Lift Best Up to Date Install Pricing on UCAs 25470? Redundant Suspension Question 5100's Part Numbers for Gen 2 OME Shocks - rust prone? What stage of RXT leaf pack did you choose? Icon Omega question?

got the lift installed...

Discussion in 'Suspension' started by LonghornTaco, Oct 25, 2008.

  1. Oct 25, 2008 at 8:20 AM
    #1
    LonghornTaco

    #1
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    got the front lift installed and I'm at Discount Tire getting the tires mounted. After that and the alignment, I'll take and post pics.

    But, I set the ToyTec coilovers like the instructions said and I got 4" of lift rather than 3. And the damn things are practically impossible to adjust on the truck, so I'll have to take the shock assembly back off to adjust down. In the meantime, am I gonna damage my CVs if I am only city driving? I also dropped the diff and inch.

    But, so far...I like!
     
    LonghornTaco, Oct 25, 2008
    #1
  2. Oct 25, 2008 at 8:22 AM
    #2
    luk8272

    #2
    luk8272 Poodoo

    Joined:
    Feb 24, 2008
    Member:
    #4929
    Messages:
    5,955
    Gender:
    Male
    First Name:
    Lucas
    Southern Louisiana
    Vehicle:
    07 Silver4dr. 4x4, V6 Shortbed
    5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Wheeler's Add A Leaf HD Pack, Icon 2.0 rear shocks, Toytec 3" lift up front with Total Chaos UCA's, Debadged, Billet Grille,TRD Offroad rims/17x9 Pro comp 6001 rims, Duratracs 265/75/16 or 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Pro-dry AFE filter. Extended Differential Breather, ABS on/off, 6000k LEDs from CSJumper, heads/fogs, ScanguageII, Devil horns, Devil horns on third brake light, Mounted 60" Highlift, Mounted Tool Box, Wet Okole Front/Rear Seat Covers, TW sticker, Midland Handheld CB,Painted engine cover, Revenge Fab Sliders, ARE Topper, Weather tech Floorliners, Camper shell, ultimate headlight upgrade. URD -3° exhaust cam gears, .5" XTP Intake spacer. Custom dents.
    Glad to hear, can't wait to see how it looks.
     
    luk8272, Oct 25, 2008
    #2
  3. Oct 25, 2008 at 9:31 AM
    #3
    LonghornTaco

    #3
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    any thoughts on the health of the CV joints with the 4" lift up front if just city driving? Also, I know it will probably settle some, but how much can I expect it to settle? I'm sure not a whole inch...
     
    LonghornTaco, Oct 25, 2008
    #3
  4. Oct 25, 2008 at 11:08 AM
    #4
    Delmarva

    #4
    Delmarva Mayor of TW

    Joined:
    Oct 22, 2008
    Member:
    #10148
    Messages:
    36,628
    Gender:
    Male
    First Name:
    Mike
    Tucson, AZ
    Vehicle:
    2013 4runner Limited Looking for a Taco
    It's the wife's T4R so it's stock
    I wouldn't do it -- but I may be paranoid about things like that. Fix the height first and then go get your wheels...
     
    Delmarva, Oct 25, 2008
    #4
  5. Oct 25, 2008 at 12:10 PM
    #5
    LonghornTaco

    #5
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Well, I've already got my tires and has my alignment done. However, I did the alignment at Firestone and I bought the lifetime alignments so I could make adjustments.

    Next weekend I'll probably take it apart and adjust it down.
     
    LonghornTaco, Oct 25, 2008
    #5
  6. Oct 25, 2008 at 12:58 PM
    #6
    neontrail

    #6
    neontrail ✈ ✈ ✈ ✈ ✈ ✈ ✈

    Joined:
    Apr 9, 2008
    Member:
    #5844
    Messages:
    10,109
    Gender:
    Male
    Idaho
    Vehicle:
    2004 NISSAN XTERRA XE/SE
    De-badged, Tint 20%, Blue 48 LED dome-light, .......
    PICSSSSSSSSSSSSSSSSSSSS Where are the picsssssssssssssssssssss?
     
    neontrail, Oct 25, 2008
    #6
  7. Oct 25, 2008 at 1:42 PM
    #7
    LonghornTaco

    #7
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    LonghornTaco, Oct 25, 2008
    #7
  8. Oct 25, 2008 at 4:44 PM
    #8
    chris4x4

    #8
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,524
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    4" is BAD. Not sure how long your CV's will last. I have heard some that fail pretty quickley, others can last a few months.
     
    chris4x4, Oct 25, 2008
    #8
  9. Oct 25, 2008 at 6:56 PM
    #9
    LonghornTaco

    #9
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    How much is it to replace the CV joint(s)?
     
    LonghornTaco, Oct 25, 2008
    #9
  10. Oct 25, 2008 at 7:03 PM
    #10
    TacoNut

    #10
    TacoNut IgnoringChrisWatchingEdLi veVicariouslyThroughMJP2

    Joined:
    Mar 29, 2008
    Member:
    #5597
    Messages:
    5,237
    Gender:
    Male
    First Name:
    Adam
    Denver, Co
    Vehicle:
    16 TRD OR DCSB Quicksand
    It's one of those things thats a $12 part but if you have someone else do it they'll put a hole in your wallet. If you do replace them your self make sure you get the solid slip on ones and not the ones that are cut in half and you clamp them together.

    IMO just lower it an inch and don't worry about it.

    Truck looks good by the way!
     
    TacoNut, Oct 25, 2008
    #10
  11. Oct 25, 2008 at 7:05 PM
    #11
    LonghornTaco

    #11
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    Oh, that's what I plan to do - take it down an inch. Just wanted to know...
     
    LonghornTaco, Oct 25, 2008
    #11
  12. Oct 28, 2008 at 10:00 PM
    #12
    LonghornTaco

    #12
    LonghornTaco [OP] Can you pass the bailout please?

    Joined:
    Oct 6, 2008
    Member:
    #9763
    Messages:
    3,318
    Gender:
    Male
    First Name:
    Jason
    Minnesota
    Vehicle:
    Black 09 4x4 TRD Off Road Doublecab
    3" ToyTec coilover lift on Bilstein 5100s, Total Chaos UCAs, ToyTec diff drop, Scangauge II, 4D MagLite mounted on the drivers seat, Painted engine cover, Painted calipers (red), Painted skid plate (red) Valentine 1 radar detector hard wired, Damplifier Pro on the floor, back wall and doors, Luxury Liner Pro on the floor and doors, Kenwood DNX8120, 2 Pioneer TS-SW1041D 10" shallow mount subs, 2 Pioneer PRS-D4200F 1200W amps, Mr Marv sub enclosure, Hybrid Audio Clarus 6.5" components in the front doors, Alpine 5.25" coaxials in the rear doors, A.R.E. LSII fiberglass tonneau cover, All Pro bumper, All Pro sliders, Wet Okole seat covers, Sockmonkey Mountain badges, PIAA 510 SMR Driving Lights, Warn M8000 Winch, Bud Built skids
    So, tonight I finally tackled adjusting those coilovers... I was going to do it on Thursday, when I had some help, but I was starting to get a little paranoid about blowing a CV joint. I've heard days or months... So, I went to O'Reilly's got the last couple of tools that I needed (borrowed someone elses last time) and did it myself.

    Took me about 2 hours (would have been a little easier and faster with someone else) but I adjusted the coilovers down just over a half inch (which should translate into 1" lower). As soon as I torqued everything down, put the tires back on and lowered the truck off the jacks, I measured it and it was EXACTLY THE SAME!!!

    I drove it around the block and it appears to have gone down almost 3/4". I'm gonna check it again when I get to work tomorrow and see if it's settled anymore. Otherwise, I'm gonna have to take it apart again and adjust more!

    In order to get the coilover off, I had to take the ball joint of the UCA off the spindle which I wasn't planning on - so I practically had to take the whole damn thing apart!

    Anyway, I'll keep you updated.
     
    LonghornTaco, Oct 28, 2008
    #12
  13. Nov 5, 2008 at 3:04 PM
    #13
    DAN LUSHER

    #13
    DAN LUSHER HI-TECH LIFTS

    Joined:
    Oct 7, 2008
    Member:
    #9785
    Messages:
    7
    ELYRIA, OHIO
    Vehicle:
    TACOMA
    3.5 INCH LIFT , MORE TO COME.
    Got a question all cvs are pretty much the same to much angle and they bind. I have lifted alot of trucks, i mean alot, if they are raised off (full drop)the ground and wheels rotate freely , there will be no and i mean no issues chevy, ford , dodge. Toyota is no difference drop the diff 1 inch no problems whats all the early failure talk. Have not seen any fail.
     
    DAN LUSHER, Nov 5, 2008
    #13

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.67
VIAIR 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)
$90.01
M18 Cordless Lithium-Ion 6-1/2" Circular Saw - 2630-20 - ( MILWAUKEE ) - BARE TOOL
$79.00
Moog 81102 Coil Spring Set
$165.95
Philips 9003 MotoVision Motorcycle and Powersport Replacement Headlight Bulb, 1 Pack
$22.10
MOOG K80827 Front Lower Suspension Ball Joint for Toyota Tacoma
$23.43
Detroit Axle - 2 Front Lower Ball Joints for 2005-2019 Toyota Tacoma Lower Ball Joint 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Replacement
$26.72
3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)
$7.89
Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010
$20.10
ENERGY SUSPN Energy Suspension 8.10106G Rack & Pinnion Bushing Set
$64.78
Genuine Toyota 4Runner TRD PRO Matte Black Wheels PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)
$1,024.99
MOOG K90258 Front Left Lower Suspension Ball Joint for Toyota Tacoma
$48.78
MICTUNING RGB LED Rock Lights with Upgraded APP Bluetooth Controller, Timing Function, Music Mode - 4 Pods Multicolor Neon LED Light Kit
$49.95
OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
$48.99
MOOG K200119 Suspension Control Arm Bushing Kit for Toyota Tacoma
$24.28
CRC 03007 3-36 16oz Multi-Purpose Lubricant and Corrosion Inhibitor Spray Bottle
$24.62
APDTY 035181 Rear Leaf Spring Insert 20870046
$24.78
10" Vise Grips Locking Plier Sheet Metal Clamp Tool
$23.99
Seaboard High Density Polyethylene Sheet, Matte Finish, 1/2" Thick, 12" Length x 24" Width, Black
$41.23
ARB EL46XL EXTRA LEAF SPRING
$44.00
Daystar, Toyota FJ Cruiser 1.5" Rear Lift Kit, fits 2007 to 2014 2/4WD, all transmissions, all cabs KT09127BK, Black
$45.16
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
$44.09
Supreme Suspensions - Heavy Duty Coil Spring Compressor Tool with Clamps - Can Cooler Included with Purchase
$45.00
Handor Coil Spring Compressor Tool Automotive 2 PCS Ultra Rugged Strut Spring Compressor Tool, Heavy Duty Macpherson Strut Spring Compressor Set
$37.99
KYB SM5184 - Strut mount
$37.49
Front Suspension Lift Kit - 1.5" Lift - Compatible with 2005-2021 Toyota Tacoma (6-Lug), 2003-2021 4Runner, 2007-2014 FJ Cruiser (4WD) - Leveling Kit Strut Upper Top Aluminum Spacers Accessories
$39.78
Gabriel G63494 White Ultra Truck Shock, 1 Pack
$39.78
OEMTOOLS 25550 MacPherson 10.75" Strut Spring Compressor, Set of 2 Universal Spring Compressor Tools, 9.75" Maximum Safe Opening
$39.49
Supreme Suspensions - 1" Rear Lift Blocks for Toyota Tacoma/Tundra/IFS Pickup/IFS T100 2WD/4WD - High-Strength Steel Rear Lift Blocks 9/16th Pin - Can Cooler Included with Purchase
$39.95
Prothane 19-1751 Super Grease Tube - 14 oz.
$50.62
FK Bearings WSSX16T Spherical Bearing with Teflon, 1" (1-3/8 Wide), 1 Pack
$54.99
Icon Billet Aluminum Sway Bar Relocation Blocks Kit 611030
$51.45
Lincoln 1134 Extra Heavy Duty Pistol Grip Grease Gun, 6" Rigid Extension, Dual Lip Follower, Variable Stroke Mechanism, 18 Whip Hose with Coupler
$51.30
Daystar KU09017BK 3" Tall x 4-1/2" Long x 2-1/2" Wide Bump Stop
$54.99
Macnaught K32 Pistol Grip Grease Gun with 10 Year Performance Warranty - with NPT Whip (K32-01)
$57.00
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound All-in-One Car Lift, Heavy Duty Vehicle Unijack, 640912
$59.99
ACDelco Professional 45D2266 Front Passenger Side Lower Suspension Ball Joint Assembly
$59.22
Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool
$59.99
2-1/2" Wide MEGA-DUTY Axle LEAF SPRING REBOUND CLAMPS - SET OF FOUR (4) (OFF-ROAD VEHICLES)
$59.99
ARB Bush Kit OME Shackle Tacoma (OMESB121)
$39.81
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
$38.65
ICON 198000 Spanner Wrench for Coil-Over Shock
$43.94
To Top