Ok so I finally found someone to do my fabrication and planning on pulling the trigger on rear long travel on my 2001 tacoma. After reading through piles of threads I think this is the route I want to go. Let me know your thoughts or if there are better routes to go. What else will we need. I have a 4x4 with 2.5 lift in front so I also want it to sit level or one inch low in the back.
deaver F67 spring under
TC 12 shackles over the frame.
Fox 2.5 16" bypasses probably just doubles
- shocks behind the axle .
I already have fox airbumps.
Lets hear thoughts on the parts list.