Eibach coils and lean??

I'm running 5100's at 0 with Eibach coils and my truck leans toward the driver's side. I have a spacer plate on the driver's side also. Anyone else having this issue and what can I do to fix it? I wouldn't think throwing another spacer in there would be a good idea is it?

 

So I'm the only one that has a lean with Eibach coils?

 

its the TACO lean. I am not sure if putting a thicker spacer in there is a good idea on the coils.
I have my eibachs set at 0.85 with a space and the lean is all but gone or its close enough i don't see it unless I measure

 

I'm baffled that I've got it with the Eibachs as stiff as they are. I put the top plate on the drivers side to correct it and I just noticed it leaning. Its not terrible but I've only had the setup for about 9 months now and I didn't have the lean when it was installed.

 

What sucks is I bought Toytec's new complete 3 inch assembly, and you would think they would have thought to put the lean spacer on it. So I will always have the little lean.

 

Did you have the lean before when you had the 5100's at .85 and Eibachs? I've got a lean spacer in and everything and it still leans!

 

No i didn't