Leaf Spring Issues ALL PRO EXP

Hey guys so I'm in the middle of putting an All pro exp. leaf pack,

Got it all torn down and I can't get the front pins out

Any thoughts

 

You're talking about the bolts that hold the front and rear of the leafs in? If so, did you take the back pins out from the shackles first? Makes it easier doing it that way first.

 

Yea! they are out and I'm carrying the weight of the spring with a jack.
after research I'm seeing some guys have had to cut them out.

 

PB Blaster and a big ass breaker bar (assuming an impact gun isn't doing the trick).

 

Yea tried it

Think I'm gonna just chop em off

 

Try some heat (if the new leaf pack as new bushings). It might at least save the bolt.

 

this or you will have to cut them out

 

turn the bolt with a wrench or impact when you remove the nut.. should free it up. take all load off the springs also