Stick or How To on Bilstein Install?

Since these are so common, why isn't there a Sticky or How To? Also, I'd really like to see some pictures.

I tried searching, maybe it's buried within one of the threads?

I also see the common question, which setting to go with. From Wheelers, I ordered the Billys and Alcan 3 Leaf Pak. I'm figuring I'll use the 2.5" fronts to match the 1.5" in the back.

 

Yes check on the suspension section there should. Be a sticky there

 

Make sure you're checking the box that says 'search titles only'.

The sticky had the pics deleted so you'll have to do some digging thru the thread.

 

I don't try to link to other sites but TN has a great DIY section.

http://www.toyotanation.com/forum/61-2nd-generation-2005/215551-5100s-installed-pics.html

http://www.toyotanation.com/forum/6...75-2005-tacoma-modification-diy-articles.html

 

If you are just wanting to install the Bilsteins with your stock coils.

http://www.tacomaworld.com/forum/suspension/211535-billstein-5100-easy-install-method.html

 

I used this sticky for installing the Toytec 3" Lift Kit. It uses Bilstein 5100s on the front and rear, so I just disregarded the installation instructions for the parts that were not the 5100s. Hope that helps

http://www.tacomaworld.com/forum/2nd-gen-tacomas/40467-how-toytec-lift-install-smtrdsport.html