Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

Procomp 6" lift, Allpro 3" Leafs

Reply
 
Thread Tools Search this Thread
Old 06-07-2012, 09:44 AM   #1
areghas [OP] areghas is offline
Member
areghas is on a distinguished road
Air Force: AC-130W DCC
Joined: Mar 2012, #74941
Location: Cannon AFB
Gender: Male
Posts: 41
areghas's Tacoma Gallery
Procomp 6" lift, Allpro 3" Leafs

I have an 08 taco DCSB with a 6" procomp lift. There is a three inch block between the stock leafs and the axle in the rear. looking at the allpro website, the 3" leaf they have provided 3 inches of lift. am I right in assuming that I can purchase their new leafs to replace my stock leafs and the block in the back and maintain the same level of lift?
  Reply With Quote
Old 06-14-2012, 05:01 PM   #2
Senior Member
gdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shedgdry06 is one of the sharper tools in the shed
 
gdry06's Avatar
Name: Gary B
Joined: Sep 2011, #64420
Location: PNW
Age: 27
Gender: Male
Posts: 282
gdry06's Tacoma Gallery
your stock leaf has a aal, so you would need to leave the block in. better off finding a use set on here or buy new. the allpro leafs wouldnt work if your looking to take out the block.
  Reply With Quote
Old 06-14-2012, 05:06 PM   #3
Senior Member
nofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shednofords08 is one of the sharper tools in the shed
Name: Patrick
Joined: Dec 2009, #28268
Location: Yugoslavia
Age: 23
Gender: Male
Posts: 16,742
nofords08's Tacoma Gallery
You can run the all pro springs with a 6" lift. I did for some time and manwithoutaplan is!
  Reply With Quote
Old 06-15-2012, 10:48 AM   #4
areghas [OP] areghas is offline
Member
areghas is on a distinguished road
Air Force: AC-130W DCC
Joined: Mar 2012, #74941
Location: Cannon AFB
Gender: Male
Posts: 41
areghas's Tacoma Gallery
I was looking to take the block out, yeah. I went ahead and did it anyway and now the truck sits funny. Its too low in the back and the all pro leafs are sitting almost flat. I'm about 2-3 inches from sitting on the bump stop in the back. Do I need to get three inch blocks again and longer u bolts to fix this?
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
3" procomp vs 3" toytec ultimate lift.... post pics? jerretxx Suspension 34 09-25-2013 12:54 PM
Fabtech / ProComp 5" or 6" Lift Owners, can you do me a major favor please? Wizzard005 2nd Gen. Tacomas 0 10-06-2011 10:31 PM
96-04 tacoma pro comp 4" lift kit and 3.5" rear procomp leafs tacoma27 Buy / Sell / Trade 1 06-26-2010 05:28 PM
FS: Procomp AAL and 3" Front Spacers (3" Lift Kit) RememberMorrison Buy / Sell / Trade 10 03-29-2009 04:46 PM
Just installed Allpro 3" leafs alexh 1st Gen. Tacomas 0 03-08-2008 08:54 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.