1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site
    Quick Links: Universal Bump stops Pro comp 3 inch lift ABS wire securing on aftermarket UCA Dealer says aftermarket suspension is cause of squeaking [Solved] Supreme Suspensions lift for 2019 TRD Offroad Replacing Control Arms & Brakes @ 161K, what else should I do while it's torn apart?

For those with TSB AAL:

Discussion in 'Suspension' started by roxspin72, Jan 30, 2009.

  1. Jan 30, 2009 at 4:08 PM
    #1
    roxspin72

    #1
    roxspin72 [OP] Enjoying my addiction

    Joined:
    Feb 9, 2008
    Member:
    #4659
    Messages:
    1,829
    Gender:
    Male
    NC
    Vehicle:
    Speedway Blue, TRD, 4X4,
    Oh Yeah!!!
    Any problems installing the toytech AAL to your four pack TSB Leafs. Will I need the longer U-Bolts. I looked under my truck and there is not that much thread showing past the nut.

    Need some assurance and advice wether I need to puchase these..

    Thanks.
     
    roxspin72, Jan 30, 2009
    #1
  2. Jan 30, 2009 at 4:15 PM
    #2
    The_Hodge

    #2
    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,633
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    u should need the longer u-bolts. should be included w/ the AAL though, right?
     
    The_Hodge, Jan 30, 2009
    #2
  3. Jan 30, 2009 at 4:20 PM
    #3
    roxspin72

    #3
    roxspin72 [OP] Enjoying my addiction

    Joined:
    Feb 9, 2008
    Member:
    #4659
    Messages:
    1,829
    Gender:
    Male
    NC
    Vehicle:
    Speedway Blue, TRD, 4X4,
    Oh Yeah!!!
    I saw center pin included, not U Bolts. Saw them on ToyTech site for like 39.99...

    Kind of confused. I read somewhere to never reuse the U Bolts:confused:
     
    roxspin72, Jan 30, 2009
    #3
  4. Jan 30, 2009 at 4:29 PM
    #4
    luk8272

    #4
    luk8272 Poodoo

    Joined:
    Feb 24, 2008
    Member:
    #4929
    Messages:
    5,957
    Gender:
    Male
    First Name:
    Lucas
    Southern Louisiana
    Vehicle:
    07 Silver4dr. 4x4, V6 Shortbed
    5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Wheeler's Add A Leaf HD Pack, Icon 2.0 rear shocks, Toytec 3" lift up front with Total Chaos UCA's, Debadged, Billet Grille,TRD Offroad rims/17x9 Pro comp 6001 rims, Duratracs 265/75/16 or 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Pro-dry AFE filter. Extended Differential Breather, ABS on/off, 6000k LEDs from CSJumper, heads/fogs, ScanguageII, Devil horns, Devil horns on third brake light, Mounted 60" Highlift, Mounted Tool Box, Wet Okole Front/Rear Seat Covers, TW sticker, Midland Handheld CB,Painted engine cover, Revenge Fab Sliders, ARE Topper, Weather tech Floorliners, Camper shell, ultimate headlight upgrade. URD -3° exhaust cam gears, .5" XTP Intake spacer. Custom dents.
    I have reused u-bolts in the past without incidence. Normally I leave about a 1/4" thread below the nut, just to be on the safe side.
     
    luk8272, Jan 30, 2009
    #4
  5. Jan 30, 2009 at 4:34 PM
    #5
    roxspin72

    #5
    roxspin72 [OP] Enjoying my addiction

    Joined:
    Feb 9, 2008
    Member:
    #4659
    Messages:
    1,829
    Gender:
    Male
    NC
    Vehicle:
    Speedway Blue, TRD, 4X4,
    Oh Yeah!!!
    See, thats my concern, I got about a 1/4" now, so imagine one more leaf.

    Hey JHODGE, remind me to show you tomorrow.
     
    roxspin72, Jan 30, 2009
    #5
  6. Jan 30, 2009 at 4:36 PM
    #6
    The_Hodge

    #6
    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,633
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    u can get a set of u-bolts from autozone and all, but make sure that they are the right length. i'd definately run e wones if they are barely out of the nut
     
    The_Hodge, Jan 30, 2009
    #6
  7. Jan 30, 2009 at 4:53 PM
    #7
    IB Slingin

    #7
    IB Slingin Well-Known Member

    Joined:
    Sep 28, 2008
    Member:
    #9535
    Messages:
    135
    I just got the OME 3" lift kit with the AAL for the TSB springs and the kit came with the center pins only. NO U-bolts.
     
    IB Slingin, Jan 30, 2009
    #7
  8. Jan 30, 2009 at 5:24 PM
    #8
    The_Hodge

    #8
    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,633
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    my pro comp AAL from EZ lift had the u-bolts w/ it
     
    The_Hodge, Jan 30, 2009
    #8
  9. Jan 30, 2009 at 5:36 PM
    #9
    chris4x4

    #9
    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    112,751,526
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2019 Rubicon 4 Door,
    4.10 gears, sliders, and lots of buttons.
    If you had the TSB done, and the U bolts are not 1/2" or more thread showing, the dealer re used the old U bolts. They tried this shit with me, and I demanded the new U bolts. I had to go back and get them. As for the AAL install, its easy, just make sure the ground your on is level, and the front wheels are chocked.
     
    chris4x4, Jan 30, 2009
    #9
  10. Jan 30, 2009 at 8:06 PM
    #10
    Neubs

    #10
    Neubs Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,021
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    I have done this (AAL w/ TSB install) twice and it is not difficult at all. Yes, you have to reuse the U-Bolts but like others have said if you have had the TSB done they should have installed longer ones for you. Mine are a good 1/2" past the bolt. The center bolts are included with the AAL.
     
    Neubs, Jan 30, 2009
    #10
  11. Jan 30, 2009 at 8:38 PM
    #11
    bambooshoots

    #11
    bambooshoots Be a fountain, not a drain.

    Joined:
    Jun 29, 2008
    Member:
    #7645
    Messages:
    702
    Gender:
    Male
    First Name:
    Kevin
    College Station, TX
    Vehicle:
    2015 Honda Accord Sport
    I did it again. Got tired of paying truck payments and gas and traded in for a 2015 Honda Accord Sport since I enjoyed my 2013 Sport so much.
    I had a shop install my AAL from ToyTec and didn't need new longer Ubolts.
     
    bambooshoots, Jan 30, 2009
    #11
  12. Jan 30, 2009 at 8:41 PM
    #12
    The_Hodge

    #12
    The_Hodge Volunteer Moderator

    Joined:
    Apr 27, 2007
    Member:
    #1432
    Messages:
    31,633
    Gender:
    Male
    SC
    Vehicle:
    15 Lariat Sport 5.0L
    Seeing the third gen section forced me to get a Ford...
    but u probably didnt have the 4 leaf tsb pack either, right?
     
    The_Hodge, Jan 30, 2009
    #12
  13. Jan 30, 2009 at 8:48 PM
    #13
    roxspin72

    #13
    roxspin72 [OP] Enjoying my addiction

    Joined:
    Feb 9, 2008
    Member:
    #4659
    Messages:
    1,829
    Gender:
    Male
    NC
    Vehicle:
    Speedway Blue, TRD, 4X4,
    Oh Yeah!!!
    Yeah, I'll measure again tomorrow, and double check with JHODGE. As far as dealer error, I doubt it, the bolts are brand spankin new...

    Just dont want to spend $40 on something I dont need, and then again, dont want to be empty handed when it comes to install.

    Thanks to all for the input though.
     
    roxspin72, Jan 30, 2009
    #13

Products Discussed in

Mobil 1 104361 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)
$29.67
VIAIR 88P Portable Compressor Kit (12V, 120 Psi, Forup to 33" Tires)
$90.01
Moog 81102 Coil Spring Set
$165.95
ENERGY SUSPN Energy Suspension 8.10106G Rack & Pinnion Bushing Set
$64.78
Genuine Toyota 4Runner TRD PRO Matte Black Wheels PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)
$1,024.99
M18 Cordless Lithium-Ion 6-1/2" Circular Saw - 2630-20 - ( MILWAUKEE ) - BARE TOOL
$79.00
Philips 9003 MotoVision Motorcycle and Powersport Replacement Headlight Bulb, 1 Pack
$22.10
Toyota Oil Drain Plug Crushable Steel Gaskets Set of 10 OEM 12157-10010
$20.10
MOOG K80827 Front Lower Suspension Ball Joint for Toyota Tacoma
$23.43
Detroit Axle - 2 Front Lower Ball Joints for 2005-2019 Toyota Tacoma Lower Ball Joint 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Replacement
$26.72
3M VHB 100x200mm~ (4" X8") Double Sided Foam Adhesive Sheet Tape 5952 Automotive Mounting Industrial Grade Very High Bond 5952 (1 Sheets 100x200mm)
$7.89
Lexus Genuine Factory 2 EMBLEM NUTS 90183-06044
$8.99
MOOG K90258 Front Left Lower Suspension Ball Joint for Toyota Tacoma
$48.78
OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
$48.99
MOOG K200119 Suspension Control Arm Bushing Kit for Toyota Tacoma
$24.28
CRC 03007 3-36 16oz Multi-Purpose Lubricant and Corrosion Inhibitor Spray Bottle
$24.62
APDTY 035181 Rear Leaf Spring Insert 20870046
$24.78
10" Vise Grips Locking Plier Sheet Metal Clamp Tool
$23.99
Seaboard High Density Polyethylene Sheet, Matte Finish, 1/2" Thick, 12" Length x 24" Width, Black
$41.23
ARB EL46XL EXTRA LEAF SPRING
$44.00
Daystar, Toyota FJ Cruiser 1.5" Rear Lift Kit, fits 2007 to 2014 2/4WD, all transmissions, all cabs KT09127BK, Black
$45.16
Orion Motor Tech OMT 5-in-1 Ball Joint Separator, Pitman Arm Puller, Tie Rod End Tool Set for Front End Service, Splitter Removal Kit (RD06)
$44.09
Supreme Suspensions - Heavy Duty Coil Spring Compressor Tool with Clamps - Can Cooler Included with Purchase
$45.00
Handor Coil Spring Compressor Tool Automotive 2 PCS Ultra Rugged Strut Spring Compressor Tool, Heavy Duty Macpherson Strut Spring Compressor Set
$37.99
KYB SM5184 - Strut mount
$37.49
Front Suspension Lift Kit - 1.5" Lift - Compatible with 2005-2021 Toyota Tacoma (6-Lug), 2003-2021 4Runner, 2007-2014 FJ Cruiser (4WD) - Leveling Kit Strut Upper Top Aluminum Spacers Accessories
$39.78
Gabriel G63494 White Ultra Truck Shock, 1 Pack
$39.78
OEMTOOLS 25550 MacPherson 10.75" Strut Spring Compressor, Set of 2 Universal Spring Compressor Tools, 9.75" Maximum Safe Opening
$39.49
Supreme Suspensions - 1" Rear Lift Blocks for Toyota Tacoma/Tundra/IFS Pickup/IFS T100 2WD/4WD - High-Strength Steel Rear Lift Blocks 9/16th Pin - Can Cooler Included with Purchase
$39.95
Prothane 19-1751 Super Grease Tube - 14 oz.
$50.62
FK Bearings WSSX16T Spherical Bearing with Teflon, 1" (1-3/8 Wide), 1 Pack
$54.99
Icon Billet Aluminum Sway Bar Relocation Blocks Kit 611030
$51.45
Lincoln 1134 Extra Heavy Duty Pistol Grip Grease Gun, 6" Rigid Extension, Dual Lip Follower, Variable Stroke Mechanism, 18 Whip Hose with Coupler
$51.30
Daystar KU09017BK 3" Tall x 4-1/2" Long x 2-1/2" Wide Bump Stop
$54.99
Macnaught K32 Pistol Grip Grease Gun with 10 Year Performance Warranty - with NPT Whip (K32-01)
$57.00
Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound All-in-One Car Lift, Heavy Duty Vehicle Unijack, 640912
$59.99
ACDelco Professional 45D2266 Front Passenger Side Lower Suspension Ball Joint Assembly
$59.22
Shankly Spring Compressor Tool - Heavy Duty Build, Ultra-Rugged Coil Spring Compressor Tool or Strut Spring Compressor Strong and Durable ATV Spring Compressor Tool
$59.99
2-1/2" Wide MEGA-DUTY Axle LEAF SPRING REBOUND CLAMPS - SET OF FOUR (4) (OFF-ROAD VEHICLES)
$59.99
ARB Bush Kit OME Shackle Tacoma (OMESB121)
$39.81
Milton (S-3101) Pistol Grease Gun - High Pressure, High Volume
$38.65
ICON 198000 Spanner Wrench for Coil-Over Shock
$43.94
To Top