Mike "Wuzzy121". Rest in peace, brother

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

Advice on Lift and Tire options?

Reply
 
Thread Tools Search this Thread
Old 02-19-2013, 04:58 PM   #1
Senior Member
DoubleYotaBoy is on a distinguished road
 
DoubleYotaBoy's Avatar
Name: Jonathan
Joined: Feb 2013, #97762
Location: Clinton, NC
Gender: Male
Posts: 118
DoubleYotaBoy's Tacoma Gallery
Advice on Lift and Tire options?

I want a 3-4 inch front lift for 06 prerunner and to be able to run at least 275s if not 285s or 33s on factory 16inch rim, but I really dont want to have to use wheel spacers to keep the tire from being set out so much. Any ideas or pictures i can go by? Thanks.
  Reply With Quote
Old 02-19-2013, 06:30 PM   #2
Senior Member
evanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shedevanmb31 is one of the sharper tools in the shed
 
evanmb31's Avatar
Name: evan
Joined: Jan 2012, #70729
Location: connecticut
Age: 27
Gender: Male
Posts: 7,238
evanmb31's Tacoma Gallery
Popular 3" lifts here are toytecs ultimate lift kit and a full Old man emu setup. Both will give you around 3" of lift. You do not want to lift any higher than 3" unless you do a drop bracket lift. You WILL need wheels spacers to run 285s or wider on stock wheels. You will not need spacers for a tall skiny tire on stock wheels. A good option if you go that route is 255/85/16 (33.3"x10.5) but i would still get some smaller spacers for for a little wider stance. look at my gallery, i have 2.5" of lift with a full OME setup and 285s

Edit. Re read your post. You have a prerunner so you can do a 4" spindle lift. I would recomend this, i dont know much about it but i would go this route if i had a prerunner.
  Reply With Quote
Old 02-19-2013, 07:18 PM   #3
Senior Member
DoubleYotaBoy is on a distinguished road
 
DoubleYotaBoy's Avatar
Name: Jonathan
Joined: Feb 2013, #97762
Location: Clinton, NC
Gender: Male
Posts: 118
DoubleYotaBoy's Tacoma Gallery
Quote:
Originally Posted by evanmb31 View Post
Popular 3" lifts here are toytecs ultimate lift kit and a full Old man emu setup. Both will give you around 3" of lift. You do not want to lift any higher than 3" unless you do a drop bracket lift. You WILL need wheels spacers to run 285s or wider on stock wheels. You will not need spacers for a tall skiny tire on stock wheels. A good option if you go that route is 255/85/16 (33.3"x10.5) but i would still get some smaller spacers for for a little wider stance. look at my gallery, i have 2.5" of lift with a full OME setup and 285s

Edit. Re read your post. You have a prerunner so you can do a 4" spindle lift. I would recomend this, i dont know much about it but i would go this route if i had a prerunner.
preciate it!
  Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tire size options after 3" lift itsdanhalen Wheels & Tires 5 01-28-2013 05:05 PM
Advice needed for rear lift options Republican Tacoma 2nd Gen. Tacomas 9 09-18-2012 08:42 PM
Options other than lift to fit bigger tire? brp Wheels & Tires 26 07-06-2012 10:50 AM
Non-prerunner/4WD wheel/tire & lift options? 0uTkAsT 1st Gen. Tacomas 7 06-29-2011 12:19 AM
3" Lift Tire/Wheel lift options. dman597 Wheels & Tires 17 09-21-2010 03:14 PM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.