1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

5100 fitment questions

Discussion in 'Suspension' started by Mike V., Mar 15, 2013.

  1. Mar 15, 2013 at 7:12 AM
    #1
    Mike V.

    Mike V. [OP] Member

    Joined:
    Dec 21, 2012
    Member:
    #93516
    Messages:
    21
    Gender:
    Male
    First Name:
    Mike
    Georgia
    Vehicle:
    11 Prerunner, 13 Prerunner
    Ok, so I have (after reading 100's of threads) talked myself out of a "spacer" lift and am going with a 3" lift kit with Bilstein 5100 Height Adj. Coilovers

    My question is I plan on running an 18" x 9" wheel, what offset/backspacing will i need and what is the largest tire size I can run with this setup? WIll I need UCA's?

    Oh, I have a dbl cap 2011 Prerunner...
     
    Last edited: Mar 15, 2013
  2. Mar 15, 2013 at 7:18 PM
    #2
    NiceTaco

    NiceTaco Canadian Redneck

    Joined:
    May 1, 2008
    Member:
    #6336
    Messages:
    486
    Gender:
    Male
    Ontario, Canada
    Vehicle:
    2012 TRD Sport
    Aero Turbine 2525, Front bilstein 5100's @1.75, rear 5100's, 1" Toytec rear block, Devil Horns, BGF AT's, 18" Moto Metal 962's
    You Will need UCA's anything over 2" of lift to get it aligned.

    As far as offset from what I have been told -12 offset with 4.5" backspacing will give you the best room for bigger tires.. I just got
    0 offset with 5" backspacing wheels and I am told I will be fine but I am only going max of 275's..

    Good luck.
     

Products Discussed in

To Top