LSC15's 95 Tacoma 4x4

Go Back   Tacoma World Forums > Tacoma Garage > Suspension

Notices

Redoing my lift.. Need some opinions

Reply
 
Thread Tools Search this Thread Display Modes
Old 03-26-2013, 12:32 PM   #1
Member
tacomaoffroad is on a distinguished road
Joined: May 2009, #17567
Location: Jax
Age: 24
Gender: Male
Posts: 70
tacomaoffroad's Tacoma Gallery
Redoing my lift.. Need some opinions

Hey guys so right now I'm running a 3" toytec lift. I have an arb bumper up front with no winch. Have been running it for probably 6 years now and I'm ready for something a little smoother. Here's what the lift consist of now
Front:
Ome 885 with stock shocks and a 1/2" spacer on top of the coil over. Also have the diff drop which I will probably eliminate when I redo the lift. I hear a clunking every time I back up coming from the front and I'm pretty certain it's from that.
Rear: stock leaf pack with an aal from toytec. Shims under the packs to help the angle
Tire setup: stock wheels with 265/75/16 BFF a/t.
What I'm looking to do is to lower it a bit. There's too much space in between the tires and fenders right now. Ill post a pic later. Also looking to improve the bone jarring ride quality that ive dealt with for years. Majority of it is from the e rated tires but I'm sure a nicer suspension would improve it some.
So here are my options.
1. Grab some 5100s and putting my stock springs back in the front while setting the 5100s to 2" and removing the aal in the back and getting the tsb done.
2. Leave everything as is and just put the 5100s in on the stock setting. I realize this wont change my ride height but I can probably live with the height thing if my ride improves. I can always use the extra ground clearance while offloading.

What do you guys think will offer the best ride on road?
  Reply With Quote
Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Similar Threads
Thread Thread Starter Forum Replies Last Post
Redoing the system. Iceman2448 Audio & Video 12 03-09-2012 07:47 PM
redoing BHLM - how do I deal with extra silicon added first time? sook 2nd Gen. Tacomas 1 04-21-2011 10:26 AM
3'' lift opinions nickpatton189 Suspension 22 03-27-2011 07:41 PM
Blue Magic Pure Rubber Coating - Redoing Bumper Finish Manlaan Product Reviews 0 10-28-2010 03:26 PM
redoing my alarm 07TacoRidah Technical Chat 0 09-28-2010 08:55 AM


Copyright © 2014 Tacoma Forum. Tacoma World is not owned by, or affiliated with Toyota Motor Corporation.