Suspension lift "extras"

I'm trying to make sure I Order everything I need when ordering my suspension upgrade. I have a stock 2001 Tacoma 3.4L 2WD TRD double cab.

Here's the suspension I'm getting...
- Bilstein's 5100 adjustables for the front
- Eibach 3" coils for front
- Bilstein's 5125's for the rear
- OME 2.25" leaf packs for the rear

Now here's the list of all the extra equipment needed to install everything properly...
-Upper Control Arms- for all those alignment issues.
-Extended rear brake line
-Longer U-bolts
-Greasable Shackles
-Greasable main eye bolt
-Bushings
-Brake proportional valve bracket
-Exhaust relocation bracket

That's everything I plan to order

If you notice I don't have something on my list that I WILL NEED please let me know. Or if you see something on my list that I DONT NEED, please let me know.

Thanks in advance!

 

Since your are Gen1 you most likely can get away with your stock UCA's. While you are added I would consider stainless front brake lines too. Not needed but a good upgrade over the stock rubber lines. Other then this you are golden.

 

Don't the 1st gens have a center bearing on the driveshaft too?