UCA/lift questions

If i plan on leveling my truck with 5100's all around or just in the front am i going to need new UCA's or just alignment?

 

you should be fine with just the 5100's and an alignment

 

So how high can you go without having to mess with the uca?

 

general rule is 2.5"

I was at 3.5" before I swapped my UCA (in-process now), didn't have any major problems besides blown CV boots.

but that's a different story


but every truck is different. Some people will be fine, some will get vibes

 

Wouldn't the year of the vehicle make a difference? I am under the impression your info is in regards to an early Tacoma while the OP is asking about a late style Tacoma.

PK

 

About 2.5" is the max and that is pushing it from everything you'll read on here.

 

not really. our vehicles all have the same suspensions; sans differently placed bolt holes and model specific hardware

lifting affects both ifs systems the same

 

I am at about 3 or a bit less and no vibes just recently started getting neg camber wear on my tires. But also in the process of UCAs and spindles to lower my preload

 

Whats the biggest wheel size i could run with that kind of lift?