Newbie Lift Help

Im looking to get a 4x4 tacoma. Is is possible to clear an 18x10 or a 20x10 wheel with 33x12.50s on possibly a level and small body lift. Is this possible? If not, I may go with an 18 or 20x9 with a deep offset (-12 or more)

Do body lifts on the tacoma show to much frame? Thanks for yalls help!

 

I'll answer in order of asked:

Yes of course, but you are better off going with a 20x9 or an 18x9, there are far less issues.
Depending on the height of the BL, yes, and IMO, it's fugly. A 1 or 1.5" BL isn't too bad looking, but after that it goes downhill. At the end of the day it's your truck so do what you want with it.

 

I definitely wouldnt go over a 1.5" bl. Do they make a 1.5"bl for the tacoma?

 

Go too high with the body lift and things can get sketch with failures.

 

I have 20x10.50 on 275/55 with just a daystar top plate

 

Pics? how far do they stick out? Do you know the offset and backspace?

 

Not far, just check my pics on page 2.

 

page 2 of what?

 

who makes a 1.5" bl?

 

hump day BUMP

 

My photo album. (The little camera under may avatar)

 

if you just want your wheels to stick out, then get any wheel and add some wheel spacers. Thats what I did. 10,000 miles on the wheel and wheel spacers, and not a single problem.

 

Nice man! Isnt there more of a chance of rubbing with wheel spacers?

 

I'm not sure. I can tell you my 285's don't rub with my 3" lift unless I'm wheelin'

 

Awesome! Whats included in the 3" lift for the front?

 

BBump

 

Id like a minimal lift and try to keep all my angles pretty straight and possibly do ucas

 

anyone? Hump day bump